(2)
Install the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-480-001).
(3) Remove the girt bar fittings (Ref. TASK 52-11-31-000-003).
**ON A/C ALL
4. Procedure
_________
Subtask 52-11-31-020-061
A. Removal of the Blanking Plates (Ref. Fig. 414/TASK 52-11-31-991-017, 415/TASK 52-11-31-991-018)
(1)
Pull the cords (4) up to remove the sealant from the floor panel joints.
(2)
Remove the remaining sealant around the blanking plates (1) and (2) with CLEANING AGENTS (Material No. 11-004), MISCELLANEOUS (Material No. 19-003) and a non-metallic scraper.
(3)
Loosen the screws (3) and remove them.
1EFF : ALL 1 52-11-31Page 464 1 1 Aug 01/05 1 1 1CES 1
R R Girt-Bar Fitting Blanking-Plates Figure 414/TASK 52-11-31-991-017
1EFF : 1 1 1CES ALL 1 111 52-11-31 Page 465 Aug 01/04
R R Blanking Plates Sealing Figure 415/TASK 52-11-31-991-018
1EFF : 1 1 1CES ALL 1 111 52-11-31 Page 466 Aug 01/04
R (4) Remove the blanking plates (1) and (2).
1EFF : ALL 1 52-11-31Page 467 1 1 Aug 01/04 1 1 1CES 1
R TASK 52-11-31-400-005 R Installation of the Girt-Bar Fitting Blanking-Plates R 1. Reason for the Job
__________________ R Self Explanatory R 2. Job Set-up Information
______________________ R A. Fixtures, Tools, Test and Support Equipment R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION R -------------------------------------------------------------------------------R No specific access platform 3.5 m (11 ft. 6 in.)
R B. Consumable Materials R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R Material No. 09-005 R R Material No. 11-004 R R R Material No. 19-003 R R Material No. 19-027 R
USA MIL-S-81733 CLASS C
CORROSION INHIBITIVE INTERFAY SEALANT (Ref. 20-31-00)
USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
F NSA3811
WHITE CORD-BRAIDED (NYLON) (Ref. 20-31-00)
1EFF : ALL 1 52-11-31Page 468 1 1 Aug 01/04 1 1 1CES 1R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 25-62-44-400-001 R 52-10-00-080-001 R R 52-10-00-080-001 R R 52-10-00-410-001 R 52-10-00-860-001 R R 52-10-00-860-002 R R 52-11-31-400-003 R 52-11-31-991-017 R 52-11-31-991-018
R 3. Job Set-up
__________
R Subtask 52-11-31-869-053 Installation of the Escape-Slide Pack-Assembly Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft Closing of the Passenger/Crew Door Special Precautions before Work on the Passenger/Crew Door Special Precautions after Work on the Passenger/Crew Door Installation of the Girt Bar Fittings Fig. 414 Fig. 415
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access platform is in position at the applicable R passenger/crew door.
R (2) Make sure that the door lining panels, the door-frame lining panels R and the insulation are removed.
R (3) Obey the special precautions before you start work on the door R (Ref. TASK 52-10-00-860-001).
R (4) Make sure that the parts retained from the removed component are R clean and in the correct condition.
1EFF : ALL 1 52-11-31Page 469 1 1 Aug 01/04 1 1 1CES 1 1EFF : ALL 1 52-11-31Page 470 1 1 Aug 01/04 1 1 1CES 1
R Subtask 52-11-31-865-065
R B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and
R tagged
R -------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION
R -------------------------------------------------------------------------------
R 121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11
R 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10
R 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
R 4. Procedure_________
R Subtask 52-11-31-420-061
R A. Installation of the Girt-Bar Fitting Blanking-Plates
R (Ref. Fig. 414/TASK 52-11-31-991-017, 415/TASK 52-11-31-991-018)
R (1) Clean all the surfaces between the components with CLEANING AGENTS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(50)
