Subtask 52-13-00-110-051
C. Cleaning of the Structure
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure
_________
Subtask 52-13-00-220-053
A. Inspection
(Ref. Fig. 604/TASK 52-13-00-991-010)
(1) Do a detailed inspection of:
-The internal structure
-The inner skin
-The vertical curved members
-The longerons of the passenger/crew door.
1EFF : ALL 1 52-13-00Page 615 1 1 Aug 01/05 1 1 1CES 1
R Internal Structure of the Aft Passenger/Crew Doors Figure 604/TASK 52-13-00-991-010
1EFF : 1 1 1CES ALL 1 111 52-13-00 Page 616 Feb 01/04
(2) Make sure that there is no :
(a) Corrosion damage : - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
Subtask 52-13-00-916-051
B. Application of Temporary Protection
CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS._______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
CAUTION : DO NOT APPLY STORAGE PRESERVATION ON THE DOOR CONTROL_______ MECHANISMS. THIS IS BECAUSE STORAGE PRESERVATION CAN PREVENT CORRECT OPERATION OF THE MECHANISMS.
R R R (1) Apply masking paper or masking tape BONDING AND ADHESIVE COMPOUNDS (Material No. 08-074) on the items adjacent to the area : the seals, bellows, door mechanisms, proximity switches and fittings.
(2) Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.
(3) Remove the masking paper or the masking tape.
1EFF : ALL 1 52-13-00Page 617 1 1 May 01/03 1 1 1CES 1
5. Close-up
________
**ON A/C 001-002,
Subtask 52-13-00-420-051
A. Installation of the Component
(1) Install the insulation blankets.
(2) Install the escape slide (Ref. TASK 25-62-44-400-001). R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-13-00-420-051-A
A. Installation of the Component
(1) Install the insulation blankets.
(2) Install the escape slide/raft(Ref. TASK 25-62-44-400-001).
**ON A/C ALL
Subtask 52-13-00-410-059
B. Close Access
(1)
Install the lining panels on the passenger/crew door.
(a)
For the aft passenger/crew door 832: 832DZ, 832EZ, 832CZ 832AZ, 832BZ (Ref. TASK 25-23-46-400-002)
(b)
For the aft passenger/crew door 842: 842DZ, 842EZ, 842CZ 842AZ, 842BZ (Ref. TASK 25-23-46-400-002)
(2)
Obey the special precautions after the work on the door. (Ref. TASK 52-10-00-860-002)
(3)
Close the applicable aft passenger/crew door (Ref. TASK 52-10-00-410-001).
(4)
Make sure that the work area is clean and clear of tool(s) and other items.
1EFF : ALL 1 52-13-00Page 618 1 1 Aug 01/05 1 1 1CES 1
(5) Remove the access platform(s).
1EFF : ALL 1 52-13-00Page 619 1 1 May 01/03 1 1 1CES 1 DOOR - PASSENGER/CREW, AFT - REMOVAL/INSTALLATION
_________________________________________________
TASK 52-13-11-000-001
Removal of the Aft Passenger/Crew Door
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific access platform 3.60 m (11 ft. 10 in.)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(75)
