1EFF : ALL 1 52-11-31Page 447 1 1 Aug 01/05 1 1 1CES 1 Roller and Proximity Switch Mechanism Figure 412A/TASK 52-11-31-991-015-A
R 1EFF : 057-099, 101-149, 151-199, 201-299, 1 52-11-31Page 448 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(9) Remove the nut (4), the bolt (16) and the washer (17).
(10)
Remove the lever (6) and the shouldered bushes (5) and (18).
(11)
Remove the spacer (19).
(12)
Remove the bellcrank (30) and the spring (29).
(13)
Remove the bolt (23) and the washer (22).
(14)
Remove and discard the cotter pin (1).
(15)
Remove the washer (3) and the pin (2).
(16)
Remove and discard the rivet (7), the trunnion (21) and the spring (20).
R 1EFF : 057-099, 101-149, 151-199, 201-299, 1 52-11-31Page 449 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-11-31Page 450 1 1 Nov 01/00 1 1 1CES 1
R **ON A/C ALL
R TASK 52-11-31-400-004
R Installation of the Roller and Proximity Switch Mechanism
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific two shims (thickness 0.2 mm (0.0078 in))
R No specific positioning templates 70 mm (2.7559 in.)
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 04-001 F AIR-4205
R WHEEL BEARING MINERAL GREASE (Ref. 20-31-00)
R Material No. 19-010 USA AMS 5687
R LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
R (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
1 pin cotter 53-16-01 23 -010 1 pin cotter 53-16-01 23A-010 7 rivet 53-16-01 23 -120 7 rivet 53-16-01 23A-120 15 cotter pin 53-16-01 23 -020 15 cotter pin 53-16-01 23A-020 38 cotter pin 53-16-01 23 -020 38 cotter pin 53-16-01 23A-020
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-23-46-400-001 Installation of the Door Linings at the FWD
Passenger/Crew Doors 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew Door
52-71-00-820-001 Adjustment of the Proximity Switches (11WV1, 11WV2, 15WV1, 15WV2) of the Locking Hook of the Pax/Crew Doors with the CHECKING TOOL-DOOR
**ON A/C 001-049, 051-056,
52-11-31-991-015 Fig. 412
R **ON A/C 057-099, 101-149, 151-199, 201-299, 301-399, 401-499,
52-11-31-991-015-A Fig. 412A
1EFF : ALL 1 52-11-31Page 451 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
**ON A/C 001-049, 051-056,
52-11-31-991-016 Fig. 413 R **ON A/C 057-099, 101-149, 151-199, 201-299, 301-399, 401-499,
52-11-31-991-016-A Fig. 413A
**ON A/C ALL
3. Job Set-up
__________
Subtask 52-11-31-860-051
A. Aircraft Maintenance Configuration
(1)
Make sure that the access platforms are in position.
(2)
Make sure that the special precautions are obeyed (Ref. TASK 52-10-00-860-001).
(3)
Make sure that the drain holes in the door structure are not obstructed.
(4)
Make sure that the parts retained from the removed component are clean and in the correct condition.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门2(46)
