3. Job Set-up
__________ Subtask 52-10-00-010-054
A. Get Access WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
THAN 65 KNOTS.
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
(1)
Put the access platform in position in front of the applicable passenger/crew door.
(2)
Open the applicable passenger/crew door 831 or 841 or 832 or 842 (Ref. TASK 52-10-00-010-001).
(3)
Apply safety precautions before work on the door. (Ref. TASK 52-10-00-860-001)
4. Procedure
_________ Subtask 52-10-00-720-056
A. Functional Test of the Visual Indicator.
(1)
Close the door from the inside. Make sure that the LOCKED indication comes into view.
(2)
Unlock the door with the inner control handle. The UNLOCKED indication comes into view and then goes out of view behind the lining panel.
(a) If necessary, adjust the locking mechanism:
-
for the FWD passenger/crew door (Ref. TASK 52-11-21-820-001),
-
for the aft passenger/crew door (Ref. TASK 52-13-21-820-001).
1EFF : ALL 1 52-10-00Page 508 1 1 Feb 01/98 1 1 1CES 1
5. Close-up
________ Subtask 52-10-00-410-055
A. Close Access
(1)
Obey the special precautions after the work on the door. (Ref. TASK 52-10-00-860-002)
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
(3)
Close the applicable passenger/crew door 831, 841, 832, 842 (Ref. TASK 52-10-00-410-001).
(4)
Remove the access platform(s).
1EFF : ALL 1 52-10-00Page 509 1 1 Feb 01/98 1 1 1CES 1 TASK 52-10-00-720-003
R Functional Check of Locking Mechanism
1. Reason for the Job
__________________
Refer to the MPD TASK: 521000-05
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) R No specific dynamometer No specific access platform 3.5 m (11 ft. 6 in.) R 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
(98D52103501000) for Escape Slide 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
(98D52103501000) for Escape Slide/Raft
52-10-00-410-001 Closing of the Passenger/Crew Door
52-10-00-480-001 Installation of the Passenger/Crew Door Ballast
Weight (98D52103501000) for Escape Slide 52-10-00-480-001 Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew Door 52-11-21-820-001 Adjustment/Test of the Door Locking Mechanism of the FWD Passenger/Crew Door 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(89)
