(2)
Open the applicable passenger/crew door (Ref. TASK 52-10-00-010-001).
(3)
Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
Subtask 52-11-00-865-052
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
**ON A/C 001-002,
Subtask 52-11-00-010-052
D. Removal of Components
(1)
Remove the lining flap (Ref. TASK 52-11-31-000-001).
(2)
Remove the escape slide (Ref. TASK 25-62-44-000-002).
1EFF : ALL 1 52-11-00Page 506 1 1 May 01/05R 1 1 1CES 1
(3)
Remove the door lining panels (Ref. TASK 25-23-46-000-001):
(a)
For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ.
(b)
For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ.
(4)
Remove the door frame lining panels:
(a)
For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW 221JW, 221KW, 221LW, 221MW, 221NW, 221PW, 221QW 231AW, 231CW (Ref. TASK 25-23-45-000-005).
(b)
For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW 222JW, 222KW, 222LW, 222MW, 222NW, 222PW, 222QW 232AW, 232CW (Ref. TASK 25-23-45-000-002).
(5) Remove the door insulation blankets.
Subtask 52-11-00-420-053
E. Installation of the Ballast Weight
(1) Install the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-480-001).
NOTE : If no ballast weight is available, it is permitted to use the
____ escape slide on the door during the adjustment (as an alternative to BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000)). If you do this, make sure that the escape slide lets you have access for the adjustment procedure.
R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-11-00-010-052-A
D. Removal of Components
(1)
Remove the lining flap (Ref. TASK 52-11-31-000-001).
(2)
Remove the escape slide/raft (Ref. TASK 25-62-44-000-002).
1EFF : ALL 1 52-11-00Page 507 1 1 Aug 01/05 1 1 1CES 1
(3)
Remove the door lining panels (Ref. TASK 25-23-46-000-001):
(a)
For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ.
(b)
For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ.
(4)
Remove the door frame lining panels:
(a)
For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW, 221JW, 221KW 221LW, 221MW, 221NW, 221PW, 221QW, 231AW, 231CW (Ref. TASK 25-23-45-000-005).
(b)
For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW, 222JW, 222KW 222LW, 222MW, 222NW, 222PW, 222QW, 232AW, 232CW (Ref. TASK 25-23-45-000-002).
(5) Remove the door insulation blankets. Subtask 52-11-00-420-053-A
E. Installation of the Ballast Weight
(1) Install the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-480-001).
NOTE : If no ballast weight is available, it is permitted to use the
____ escape slide/raft on the door during the adjustment (as an alternative to BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000)). If you do this, make sure that the escape slide/raft lets you have access for the adjustment procedure.
R 1EFF : 003-049, 051-099, 101-149, 151-199, 1 52-11-00Page 508 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 509 1 1 May 01/05 1 1 1CES 1
**ON A/C ALL
4. Procedure_________
R **ON A/C 001-049, 051-056,
Subtask 52-11-00-820-050
A. Adjustment of the Door during Opening and Closing (Ref. Fig. 501/TASK 52-11-00-991-019, 502/TASK 52-11-00-991-005)
R **ON A/C 001-002, 051-052,
(Ref. Fig. 503/TASK 52-11-00-991-006)
R **ON A/C 001-049, 051-056,
R Post SB 52-1097 For A/C 001-002,051-052,
(Ref. Fig. 503A/TASK 52-11-00-991-006-A)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(112)
