R B. Consumable Materials
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-10-00-010-001 R 52-10-00-410-001 R 52-10-00-860-001 R R 52-10-00-860-002 R R SRM 511100 P.Block 001 R SRM 512200 P.Block 001 R 52-11-00-991-023 Opening of the Passenger/Crew Door Closing of the Passenger/Crew Door Special Precautions before Work on the Passenger/Crew Door Special Precautions after Work on the Passenger/Crew Door (for corrective action) (for corrective action) Fig. 603
1EFF : ALL 1 52-11-00Page 612 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 613 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 614 1 1 May 01/03 1 1 1CES 1
R 3. Job Set-up__________
R Subtask 52-11-00-010-062
R A. Get Access
R (1) Put an access platform in position :
R (a) For the left passenger/crew door at the zone 831.
R (b) For the right passenger/crew door at the zone 841.
R (2) Open the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-
R 010-001).
R (3) Obey the special precautions before you start the work on the door.
R (Ref. TASK 52-10-00-860-001)
R Subtask 52-11-00-110-053
R B. Cleaning of the Structure
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004)
R and with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-
R 003), if necessary.
R 4. Procedure_________
R Subtask 52-11-00-210-054
R A. Inspection
R (Ref. Fig. 603/TASK 52-11-00-991-023)
R (1) Do a visual inspection of the door stop assemblies of the forward
R left and right passenger/crew doors.
R (2) Make sure that there are no cracks or signs of corrosion on the stop
R fittings and the stop screws.
R - If you find corrosion damage,refer to the Stuctural Repair Manual
R (Ref. SRM 512200 P.Block 001) for types, inspection, removal and
R corrosion protection.
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
R 5. Close-up________
R Subtask 52-11-00-410-061
R A. Close Access
R (1) Obey the special precautions after the work on the door. (Ref. TASK
R 52-10-00-860-002)
R (2) Close the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-
R 410-001).
R (3) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (4) Remove the access platform(s).
R R Forward Passenger/Crew Doors - Door Stop Assemblies Figure 603/TASK 52-11-00-991-023
1EFF : 1 1 1CES ALL 1 111 52-11-00 Page 615 May 01/03
R TASK 52-11-00-210-002
R General Visual Inspection of Forward Passenger/Crew Door Skin, External
R Surface, LH/RH
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(127)
