(4) Safety the screw (2) with MISCELLANEOUS (Material No. 19-010)
**ON A/C ALL
5. Close-up
________
**ON A/C 001-002,
Subtask 52-10-00-410-096
A. Installation of the Escape Slide
(1)
Install the escape slide (Ref. TASK 25-62-44-400-001)
(2)
Install the door lining panels:
(a)
For the FWD passenger/crew doors:
(Ref. TASK 25-23-46-400-001)
-
for the left door 831AZ
-
for the right door 841AZ
(b)
For the Aft passenger/crew doors:
(Ref. TASK 25-23-46-400-002)
-
for the left door 832AZ
-
for the right door 842AZ
1EFF : ALL 1 52-10-00Page 423 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-10-00-410-096-A
A. Installation of the Escape Slide/Raft
(1)
Install the escape slide/raft (Ref. TASK 25-62-44-400-001)
(2)
Install the door lining panels:
(a)
For the FWD passenger/crew doors:
(Ref. TASK 25-23-46-400-001).
-
for the left door 831AZ
-
for the right door 841AZ
(b)
For the Aft passenger/crew doors:
(Ref. TASK 25-23-46-000-002)
-
for the left door 832AZ
-
for the right door 842AZ
**ON A/C ALL
Subtask 52-10-00-865-078
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
Subtask 52-10-00-410-097
C. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).
(3)
Close the door 831, 841 or 832, 842 (Ref. TASK 52-10-00-410-001).
1EFF : ALL 1 52-10-00Page 424 1 1 Aug 01/05 1 1 1CES 1
(4) Remove the access platform(s).
1EFF : ALL 1 52-10-00Page 425 1 1 Feb 01/04 1 1 1CES 1 PASSENGER/CREW - ADJUSTMENT/TEST
________________________________
TASK 52-10-00-720-001
Functional Test of the Suspension of the Passenger/Crew Door
1. Reason for the Job
__________________
Refer to the MPD TASK: 521000-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific compression dynamometer No specific flashlight No specific mirror No specific access platform 3.5 m (11 ft. 6 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-000-002 Removal of the Door Linings at the AFT Passenger/Crew Doors 25-23-46-400-001 Installation of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-400-002 Installation of the Door Linings at the AFT
Passenger/Crew Doors 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew
Door 52-11-00-820-001 Adjustment of the FWD Passenger/Crew Door 52-13-00-820-001 Adjustment of the AFT Passenger/Crew Door 52-10-00-991-038 Fig. 501
1EFF : ALL 1 52-10-00Page 501 1 1 May 01/05R 1 1 1CES 1
3. Job Set-up
__________
Subtask 52-10-00-010-052
A. Get Access
WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
THAN 65 KNOTS.
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(87)
