A320飞机维护手册 AMM DOORS 舱门1(125)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  (2) Open the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-010-001). 
R R  (3) Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
 4. Procedure_________
 Subtask 52-11-00-220-052
 A. Inspection (Ref. Fig. 601/TASK 52-11-00-991-009) 
R R  (1) Do a detailed inspection of the door stop assemblies of the left and right forward passenger/crew doors.
 (2) Make sure that there are no cracks or signs of corrosion on the stop fittings and the stop screws. 
R  (3) Do a check of the door stop screws for damage. 
R R  (a) Make sure that the minimum thickness for all the stop screw heads is 2.5 mm (0.0984 in.).
 (b) If the thickness is less than 2.5 mm (0.0984 in.),replace the door stop screws (Ref. TASK 52-11-31-000-002) (Ref. TASK 52-11-31-400-002).

 

R  Forward Passenger/Crew Doors - Door Stop Assemblies Figure 601/TASK 52-11-00-991-009
 1EFF : 1 1 1CES  ALL  1 111 52-11-00 Page 603 May 01/03

 

 5. Close-up________
 Subtask 52-11-00-410-056
 A. Close Access 
R  (1) Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002). 
R  (2) Close the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-410-001).
 (3) Make sure that the work area is clean and clear of tool(s) and other items.
 (4) Remove the access platform(s).

 1EFF : ALL 1 52-11-00Page 604 1 1 May 01/03 1 1 1CES 1 TASK 52-11-00-200-002

 Detailed Inspection of Forward Passenger/Crew Door, Internal Structure, LH/RH
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 521104-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 3.50 m (11 ft. 6 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific masking paper Material No. 08-074 MASKING TAPE (Ref. 20-31-00)
 Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 1EFF : ALL 1 52-11-00Page 605 1 1 May 01/04R 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-400-001 Installation of the Door Linings at the FWD
 Passenger/Crew Doors R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly R 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly
 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
 Door 52-10-00-860-002 Special Precautions after Work on the Passenger/Crew
 Door
 SRM 511100 P.Block 001 (for corrective action)
 SRM 512200 P.Block 001 (for corrective action)
 52-11-00-991-010 Fig. 602

 3. Job Set-up
__________
 Subtask 52-11-00-010-055
 A. Get Access
 (1)
 Put an access platform in position :

 (a)
 For the left passenger/crew door, at the zone 831.

 (b)
 For the right passenger/crew door, at the zone 841.

 

 (2)
 Open the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-010-001).

 (3)
 Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).

 (4)
 Remove the lining panels from the passenger/crew door:

 (a)
 For the forward passenger/crew door 831: 831DZ, 831EZ, 831CZ, 831AZ, 831BZ (Ref. TASK 25-23-46-000-001)

 (b)
 For the forward passenger/crew door 841: 841DZ, 841EZ, 841CZ. 841AZ, 841BZ (Ref. TASK 25-23-46-000-001)

　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(125)