_
2 Remove and discard the lockwire from the nuts (46).
_
3 Loosen the nuts (46) and release the lockwashers (47).
_
4 Remove the clamp (53).
_
5 Turn the barrel of the rod (48) to retract the rod.
_
6 Remove the cotter pin (7) and discard it.
_
7 Remove the nut (8) and the washer (9).
_
8 Remove the bolt (13) and the washer (12) and the bushes (10)
_
and (11). 9 Disconnect the rod (49).
_
1EFF : ALL 1 52-11-21Page 414 1 1 Feb 01/02R 1 1 1CES 1
10 Remove the bolt (51), the nuts (49) the plate (51) and the
__ bellow (50).
(c) Remove the locking pin hook (2).
1 Remove the cotter pin (6) and discard it.
_ 2 Remove the nut (5), the bolt (15), the washer (14) and the
_
shouldered bush (4). 3 Remove the locking hook (2) and the washers (2) and (3).
_
(4) Removal of the locking pin.
(a) Disconnect the rod (33).
1 Remove the cotter pin (45) and discard it.
_
2 Remove the nut (44) and the washer (43).
_ 3 Remove the bolt (41) the washer (42) and the bushes (38) and
_
(39).
4 Disconnect the rod (33).
_
(b) Removal of the fitting (56) including the locking pin.
1 Remove the bolts (57) and (54) and the washers (55).
_
2 Disengage the fitting (56) from and the locking pin.
_
(c) Disassembly of the locking pin. 1 Remove the bolt (24), the adjustable washers (25), the caps
_
(26) (27) and (28) and the adjustable washer (29). 2 Remove the locking pin (30) from the fitting (56).
_
(d) Disconnect the rod (33).
1 Remove the cotter pin (37) and discard it.
_
2 Remove the nut (36) and the washer (35).
_ 3 Remove the bolt (31) the washer (32) and the bushes (34) and
_ (39).
1EFF : ALL 1 52-11-21Page 415 1 1 Feb 01/02R 1 1 1CES 1
Safety Pin and Locking Hook Figure 407/TASK 52-11-21-991-013- 12 (SHEET 1)
1EFF : 1 1R 1CES ALL 1 11 1 52-11-21 Page 416 Feb 01/02
Safety Pin and Locking Hook Figure 407/TASK 52-11-21-991-013- 22 (SHEET 2)
1EFF : 1 1R 1CES ALL 1 11 1 52-11-21 Page 417 Feb 01/02
4 Remove the locking pin (30).
_
(e) Remove the sealant from the fitting (56), the door structure, the thread of the bolt (24) with CLEANING AGENTS (Material No. 11-004) and MISCELLANEOUS (Material No. 19-003).
Subtask 52-11-21-020-057
G. Removal of the Locking Shaft Mechanism
(Ref. Fig. 408/TASK 52-11-21-991-015)
(1)
Close the door.
(2)
Remove the plate (113).
(a)
Remove the nuts (116), the bolts (114) and the set of washers (115).
(b)
Remove the set of washers (112) and the plate (113).
(3)
Disconnect the rods (67).
(a)
Remove the cotter pin (63) and discard it.
(b)
Remove the nut (62), the washer (64).
(c)
Remove the bolt (90) the washer (66) and the bushes (61) and (65).
(d)
Disconnect the rod (67).
(4)
Disconnect the rod (87).
(a)
Remove the cotter pin (85) and discard it.
(b)
Remove the nut (84) the washer (86).
(c)
Remove the bolt (89) and the bush (88).
(d)
Disconnect the rod (87).
(5)
Disconnect the rod (75).
(a) Release the rod (75)
(Ref. Fig. 409/TASK 52-11-21-991-016)
1 Remove the lockwire from the nuts (139) and discard it.
_
1EFF : ALL 1 52-11-21Page 418 1 1 Feb 01/02R 1 1 1CES 1
INTENTIONALLY BLANK
R 1 1
52-11-21Page 419
1 1 Feb 01/02 1 1 1CES 1
Locking Shaft Mechanism Figure 408/TASK 52-11-21-991-015- 12 (SHEET 1)
1EFF : 1 1R 1CES ALL 1 11 1 52-11-21 Page 420 Feb 01/02
Locking Shaft Mechanism Figure 408/TASK 52-11-21-991-015- 22 (SHEET 2)
1EFF : 1 1R 1CES ALL 1 11 1 52-11-21 Page 421 Feb 01/02
Locking Shaft Mechanism-Adjustment Figure 409/TASK 52-11-21-991-016- 12 (SHEET 1)
1EFF : 1 1R 1CES ALL 1 11 1 52-11-21 Page 422 May 01/98
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(169)
