Door Hoist Fittings Figure 401/TASK 52-11-11-991-001
1EFF : 1 1R 1CES ALL 1 11 1 52-11-11 Page 405 May 01/98
Subtask 52-11-11-020-055
C. Disconnection of the Door-Damper and Emergency-Operation Cylinder
(Ref. Fig. 402/TASK 52-11-11-991-003)
(1) Remove and discard the cotter pin (49).
(2) Remove the nut (48) and the washer (50).
(3) Remove the bolt (42), the lockwasher (53) and the spacer (51).
(4) Disengage the telescopic rod (52) from the eyebolt (37) and fold it
back to the support arm (40).
(5) Remove the eyebolt (37).
(a) Remove the cotter pin (31).
(b) Remove the nuts(32), the washer (33).
(c) Remove the nuts (39) and the bolts (34).
(d) Remove the flange (38).
(e) Remove the eyebolt (37) with the washer (36) and the bush (35).
R Subtask 52-11-11-020-050-A
R D. Disconnection of the Support Arms
R (Ref. Fig. 403/TASK 52-11-11-991-004)
R (1) Remove the screws (66) and the washers (67).
R (2) Disconnect the bonding leads (68).
R (3) Remove and discard the cotter pins (69).
R (4) Remove the nuts (70) and the washers (71).
R (5) Make sure that the bolts (63) move smoothly.
R (6) Adjust the tension of SLING - PASSENGER DOOR (98A52108004001) (10) if
R necessary.
R (7) Remove the bolts (63), the washers (62) and the washer sets (64) from
R the connection links (61).
1EFF : ALL 1 52-11-11Page 406 1 1 Feb 01/01 1 1 1CES 1
Door-Damper and Emergency-Operation Cylinder Figure 402/TASK 52-11-11-991-003
1EFF : 1 1R 1CES ALL 1 11 1 52-11-11 Page 407 May 01/98
Door Attachment to the Support Arm
Figure 403/TASK 52-11-11-991-004
1EFF : ALL 1 52-11-11 Page 408
1 1 Feb 01/98
1 1
1CES 1
R R R (8) Disengage and remove the door assy from the upper and lower connection links (61) with the SLING - PASSENGER DOOR (98A52108004001).
Subtask 52-11-11-020-056
E. Removal of the Sling (Ref. Fig. 401/TASK 52-11-11-991-001)
(1) Remove the sling (10) from the hoist fittings.
(2) Remove the hoist fittings (2) from the door and attach them to the sling (10).
(3) Install the blanking plug (1) in the hoisting points.
5. Close-up________
Subtask 52-11-11-481-050
A. Installation of the Safety Barriers
(1) Install the safety barrier in the opening of the removed door (Ref. TASK 52-00-00-481-001).
1EFF : ALL 1 52-11-11Page 409 1 1 Feb 01/01 1 1 1CES 1 TASK 52-11-11-400-001
Installation of the FWD Passenger/Crew Door
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific two shims (thickness 0.2 mm (0.0078 in))
No specific dynamometer 15 m.daN (110.6194 lbf.ft)
No specific positioning templates 70 mm (2.7559 in.)
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft) 98A52108004001 1 SLING - PASSENGER DOOR 98DNSA20206120 1 RIGGING PIN 98D52103006000 1 PIN - RIGGING 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(131)
