WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
1EFF : ALL 1 52-11-18Page 401 1 1 Feb 01/98 1 1 1CES 1 WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
(1)
Put the access platform in position in the zone 831 (841).
(2)
Open the applicable passenger/crew door 831, 841. (Ref. TASK 52-10-00-010-001)
(3)
Obey the special precautions before you start work on the door (Ref. TASK 52-10-00-860-001).
4. Procedure
_________ Subtask 52-11-18-020-052
A. Removal of the Door Seal.
(Ref. Fig. 401/TASK 52-11-18-991-001)
(1)
Remove the nuts (2) of the retainer (9), then the retainer (9) and the screws (3).
(2)
Remove the nuts (2) of the retainer (10), then the retainer (10) and the screws (3).
(3)
Remove the nuts (2) of the retainer (11), then the retainer (11) and the screws (3).
(4)
Remove the nuts (2) of the retainer (12), then the retainer (12) and the screws (3).
(5)
Remove the nuts (2) of the retainer (13), then the retainer (13) and the screws (3).
(6)
Remove the nuts (2) of the retainer (14), then the retainer (14) and the screws (3).
(7)
Remove the nuts (2) of the retainer (8), then the retainer (8) and the screws (3).
(8)
Remove the nuts (2) of the retainer (7), then the retainer (7) and the screws (3).
(9)
Remove the nuts (2) of the retainer (15), then the retainer (15) and the screws (3).
1EFF : ALL 1 52-11-18Page 402 1 1 Feb 01/98 1 1 1CES 1
Seal of the Forward Passenger/Crew Door.
Figure 401/TASK 52-11-18-991-001
1EFF : ALL 1 52-11-18 Page 403
1 1 Feb 01/98
1 1
1CES 1
(10)
Remove the nuts (2) of the retainer (16), then the retainer (16) and
the screws (3).
(11)
Remove the nuts (2) of the retainer (6), then the retainer (6) and the screws (3).
(12)
Remove the nuts (2) of the retainer (5), then the retainer (5) and the screws (3).
(13)
Remove the nuts (2) of the retainer (17), then the retainer (17) and the screws (3).
(14)
Remove the nuts (2) of the retainer (4), then the retainer (4) and the screws (3).
(15)
Remove the nuts (2) of the retainer (1), then the retainer (1) and the screws (3), (18).
(16)
Remove the nuts (2) of the retainer (21), then the retainer (21) and the screws (18).
(17)
Remove the nuts (2) of the retainer (20), then the retainer (20) and the screws (18).
(18)
Remove the nuts (2) of the retainer (19), then the retainer (19) and the screws (3), (18).
(19)
Remove the seal (22) of the passenger/crew door.
1EFF : ALL 1 52-11-18Page 404 1 1 Feb 01/98 1 1 1CES 1
TASK 52-11-18-400-001
Installation of the Door Seal
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(161)
