1EFF : ALL 1 52-11-00Page 616 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 617 1 1 May 01/03 1 1 1CES 1R Forward Passenger/Crew Doors - Skin - External Surface R Figure 604/TASK 52-11-00-991-022
R 3. Job Set-up__________
R Subtask 52-11-00-010-063
R A. Get Access
R (1) Put an access platform in position :
R (a) For the left passenger/crew door at the zone 831.
R (b) For the right passenger/crew door at the zone 841.
R Subtask 52-11-00-110-052
R B. Cleaning of the Structure
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004)
R and with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-
R 003), if necessary.
R 4. Procedure_________
R Subtask 52-11-00-210-055
R A. Inspection
R (Ref. Fig. 604/TASK 52-11-00-991-022)
R (1) Do a visual inspection of the external surface of the forward left
R and right passenger/crew door skin.
1EFF : ALL 1 52-11-00Page 618 1 1 May 01/03 1 1 1CES 1 1EFF : ALL 1 52-11-00Page 619 1 1 May 01/03 1 1 1CES 1R **ON A/C 003-049, 051-099, 101-105, 151-158, 201-210,
R (2) Make sure that there is no:
R (a) Corrosion damage:
R - If you find corrosion damage, refer to the Structural Repair
R Manual (Ref. SRM 512200 P.Block 001) for types, inspection,
R removal and corrosion protection.
R (b) Other damage (cracks, scratches, stress, marks, dents,
R bumps,...):
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
R 5. Close-up________
R Subtask 52-11-00-410-062
R A. Close Access
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Remove the access platform(s).
TASK 52-11-00-200-003
Detailed Inspection of Passenger/Crew Door Telescopic Girt Bar
1.
Reason for the Job
__________________
Refer to the MPD TASK: 521000-15
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门1(128)