(2)
Install the door lining (Ref. TASK 25-23-46-400-001).
(a)
For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ
(b)
For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ
(3)
Install the door frame lining panels.
(a)
For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW, 221JW, 221KW 221LW, 221MW, 221NW, 221PW, 221QW, 231AW, 231CW (Ref. TASK 25-23-45-400-006).
(b)
For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW, 222JW, 222KW 222LW, 222MW, 222NW, 222PW, 222QW, 232AW, 232CW (Ref. TASK 25-23-45-400-007).
(4)
Install the escape slide (Ref. TASK 25-62-44-400-001).
(5)
Install the lining flap (Ref. TASK 52-11-31-400-001).
1EFF : ALL 1 52-11-00Page 555 1 1 May 01/05R 1 1 1CES 1
R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-11-00-410-051-A
C. Installation of the Components
(1)
Install the door insulation blankets.
(2)
Install the door lining panels (Ref. TASK 25-23-46-400-001).
(a)
For the left door: 831FZ, 831CZ, 831DZ, 831AZ, 831BZ, 831EZ, 831GZ
(b)
For the right door: 841FZ, 841CZ, 841DZ, 841AZ, 841BZ, 841EZ, 841GZ
(3)
Install the door frame lining panels.
(a)
For the left door: 221AW, 221BW, 221CW, 221EW, 221FW, 221GW, 221HW, 221JW, 221KW 221LW, 221MW, 221NW, 221PW, 221QW, 231AW, 231CW (Ref. TASK 25-23-45-400-006).
(b)
For the right door: 222AW, 222BW, 222CW, 222EW, 222FW, 222GW, 222HW, 222JW, 222KW 222LW, 222MW, 222NW, 222PW, 222QW, 232AW, 232CW (Ref. TASK 25-23-45-400-007).
(4)
Install the escape slide/raft (Ref. TASK 25-62-44-400-001).
(5) Install the lining flap (Ref. TASK 52-11-31-400-001).
**ON A/C ALL
Subtask 52-11-00-410-060
D. Close Access
(1)
Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).
(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3)
Close the applicable passenger/crew door 831 or 841 (Ref. TASK 52-10-00-410-001) .
1EFF : ALL 1 52-11-00Page 556 1 1 Aug 01/05 1 1 1CES 1
(4)
Remove the access platform(s).
(5)
Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 52-11-00-862-050
E. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
1EFF : ALL 1 52-11-00Page 557 1 1 May 01/05R 1 1 1CES 1
TASK 52-11-00-820-002
Load Adjustment of the Control Handle of the FWD Passenger/Crew Door
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific dynamometer 20 daN (44.9617 lbf) 20 m.daN
(147.4926 lbf.ft) No specific access platform 4.4 m (14 ft. 5 in.) 98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-23-46-000-001 Removal of the Door Linings at the FWD Passenger/Crew Doors 25-23-46-400-001 Installation of the Door Linings at the FWD
Passenger/Crew Doors 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 25-62-44-400-001 Installation of the Escape-Slide Pack-Assembly 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-080-001 Removal of the Passenger/Crew Door Ballast Weight
(98D52103501000) for Escape Slide
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门1(122)
