• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 09:12来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Set the X BLEED selector switch to the AUTO position.

 (2)
 Disconnect the ground air-supply unit from the HP ground connector (7300HM).

 (3)
 Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).

 


 Combo Seals of the Pylon Duct Sleeves (Downstream Precooler)
 Figure 506/TASK 36-11-00-991-029

 

 Subtask 36-11-00-410-078
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install these access panels:

 -
For the left pylon:
 414FR


 -
For the right pylon:
 423FL.

 


 (3)
 Remove the warning notice(s).


 (4) Remove the access platform(s). Subtask 36-11-00-862-075
 C. De-energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-862-002).

 

 ENGINE BLEED AIR SUPPLY SYSTEM - INSPECTION/CHECK
_________________________________________________ TASK 36-11-00-200-002 Visual Inspection of the Fan Air Valve and Bleed-Air Precooler Exchanger after
 Hail Strike WARNING : MAKE SURE THAT THE PNEUMATIC SYSTEM IS DEPRESSURIZED BEFORE YOU START
_______ WORK ON THE PNEUMATIC SYSTEM.
 WARNING : PUT A WARNING NOTICE ON THE HIGH PRESSURE GROUND POWER CONNECTIONS TO
_______ TELL PERSONS NOT TO OPERATE THE PNEUMATIC SYSTEM.
 CAUTION : USE A SECOND WRENCH TO APPLY COUNTER TORQUE TO THE UNION ON THE VALVE
_______ WHEN YOU CONNECT THE HP SENSE TUBE.
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific lamp No specific lint-free cloth No specific mirror No specific warning notice No specific access platform 1 m (3 ft. 3 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-008 (USE 11-008A) (Ref. 20-31-00)


 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 36-11-42-000-001 Removal of the Bleed-Air Precooler Exchanger (7150HM1,7150HM2) 36-11-42-400-001 Installation of the Bleed-Air Precooler Exchanger
 (7150HM1,7150HM2) 36-11-54-000-001 Removal of the Fan Air Valve (9HA1,9HA2) 36-11-54-400-001 Installation of the Fan Air Valve (9HA1,9HA2) 71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 78-30-00-081-041 Make the Thrust Reverser Serviceable after
 Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 78-36-00-010-040 Opening of the Thrust Reverser Doors 78-36-00-410-040 Closing of the Thrust Reverser Doors 36-11-00-991-031 Fig. 601 36-11-00-991-032 Fig. 602
 3. Job Set-up
__________
 Subtask 36-11-00-861-081
 A. Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002).

 Subtask 36-11-00-941-094
 B. Safety Precautions
 (1)
 Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (2)
 On the AIR COND control panel 30VU:

 -
make sure that the ENG 1(2) BLEED pushbutton switch is released (the OFF legend is on)

 -
make sure that the APU BLEED pushbutton switch is released (the ON legend is off)


 -put a warning notice to tell persons not to operate the pneumatic system.

 (3)
 On the ENG control panel 115VU:

 -put a warning notice to tell persons not to start the engine 1(2).

 (4)
 On the HP ground connector:

 -Put a warning notice to tell persons not to pressurize the pneumatic system.

 (5)
 On the ENG section of the maintenance panel 50VU:

 


 -make sure that the ON legend of the ENG/FADEC GND PWR 1(2) pushbutton switch is off
 -put a warning notice to tell persons not to energize the FADEC 1(2).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM PNEUMATIC 气源 1(70)