(2)
Connect the hose assembly (5) to the engine tube.
(3)
Connect the hose assembly (5) to the bleed pressure regulator valve (50).
(4)
TORQUE the coupling nuts of the two ends of the hose assembly to between 135 and 150 lbf.in (1.52 and 1.69 m.daN)
NOTE : Use a second wrench to hold the engine tube and/or the fitting
____ on the valve when you torque the coupling nut.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 36-11-49Page 488 1201-210, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 106-149, 211-299, 301-399,
Subtask 36-11-49-420-055-B
A. Installation of the Pressure Regulator Valve to Interface Hose Assembly
(1) Remove the protective covers from the hose assembly (5), the engine tube and the fitting on the pressure regulator valve (50).
CAUTION : APPLY ONLY A THIN LAYER OF (CP5063) SILICON LUBRICANT TO_______ THE THREADS OF THE HOSE TUBE ASSEMBLY COUPLING NUTS AND FITTING ON THE VALVES, AND REMOVE UNWANTED LUBRICANT. KEEP LUBRICANT FROM GOING INTO THE HOSE TUBE ASSEMBLY AND VALVES. IF TOO MUCH LUBRICANT IS USED, THEN LUBRICANT MAY CLOG THE HOSE TUBE ASSEMBLY AND ENTER THE VALVES AND DAMAGE THOSE COMPONENTS.
(2) Lubricate the threads of the coupling nut and the fitting threads on the regulator valve (50) with silicon lubricant (Material No. CP5063).
(3) Connect the hose assembly (5) to the engine tube.
(4) Connect the hose assembly (5) to the fitting on the regulator valve (50).
(5) TORQUE the coupling nut on the two ends of the hose assembly (5) to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
NOTE : Use a second wrench to hold the fitting on the valve when you____ torque the hose coupling nut.
R **ON A/C 151-158,
R Subtask 36-11-49-420-055-A
R A. Installation of the Pressure Regulator Valve to Interface Hose Assembly
R R (1) Remove the protective covers from the hose assembly (5), the engine tube, and the valve (60).
R (2) Connect the hose assembly (5) to the engine tube.
R R (3) Connect the hose assembly (5) to the bleed pressure regulator valve (60).
R 1EFF : 106-149, 151-158, 211-299, 301-399, 1 36-11-49Page 489 1 1 May 01/05 1 1 1CES 1
(4) TORQUE the coupling nuts of the two ends of the hose assembly to between 135 and 150 lbf.in (1.52 and 1.69 m.daN)
NOTE : Use a second wrench to hold the engine tube and/or the fitting
____ on the valve when you torque the coupling nut.
R **ON A/C 159-199, 401-499,
Subtask 36-11-49-420-055-C
A. Installation of the Pressure Regulator Valve to Interface Hose Assembly
(1) Remove the protective covers from the hose assembly (5), the engine tube and the valve (60).
CAUTION : APPLY ONLY A THIN LAYER OF (CP5063) SILICON LUBRICANT TO
_______ THE THREADS OF THE HOSE TUBE ASSEMBLY COUPLING NUTS AND FITTING ON THE VALVES, AND REMOVE UNWANTED LUBRICANT. KEEP LUBRICANT FROM GOING INTO THE HOSE TUBE ASSEMBLY AND VALVES. IF TOO MUCH LUBRICANT IS USED, THEN LUBRICANT MAY CLOG THE HOSE TUBE ASSEMBLY AND ENTER THE VALVES AND DAMAGE THOSE COMPONENTS.
(2)
Lubricate the fitting threads on the coupling nut and the valve (60) with silicon lubricant (Material No. CP5063).
(3)
Connect the hose assembly (5) to the engine tube.
(4)
Connect the hose assembly (5) to the pressure regulator valve (60).
(5)
TORQUE the coupling nuts at the two ends of the hose assembly (5) to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
NOTE : Use a second wrench to hold the engine tube and/or the fitting
____ on the valve when you torque the coupling nuts.
R 1EFF : 151-199, 401-499, 1 36-11-49Page 490 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-105, 201-210,
Subtask 36-11-49-420-088
B. Installation of the Flexible Metal Pneumatic Hose Assembly
(1)
Remove the protective covers from the hose assembly (10) and the tube assembly (25).
(2)
Connect the hose assembly (10) to the engine tube.
(3)
Connect the hose assembly (10) to the tube assembly (25).
(4)
TORQUE the coupling nuts on the two ends of the hose assembly to between 135 and 150 lbf.in (1.52 and 1.69 m.daN).
NOTE : Use a second wrench to hold the engine tube and/or the tube
____ assembly (25) when you torque the coupling nut.
**ON A/C 151-158,
Subtask 36-11-49-420-088-A
B. Installation of the Flexible Metal Pneumatic Hose Assembly
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM PNEUMATIC 气源 1(141)
