2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-11-19-991-007 Fig. 602
R 1EFF : 001-049, 051-099, 101-105, 151-154, 1 32-11-19Page 605 1201-207, 1May 01/05 1 1 1CES 1
3. Job Set-up
__________ Subtask 32-11-19-941-063
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
(4)
On the panel 110VU, make sure that the GRAVITY GEAR EXT handle is folded into the center console.
4. Procedure
_________ (Ref. Fig. 602/TASK 32-11-19-991-007) Subtask 32-11-19-210-057
A. Detailed Inspection of Main Landing Gear Downlocking Springs and
Sidestay Center Joint Links and Cuffs
(1)
Examine the sidestay center joint links (1) and the cuffs (2).
(2)
Make sure that the center joint links (1) are correctly attached to the lugs of the cuff (2) and the lock-spring (3).
5. Close-up
________ Subtask 32-11-19-942-061
A. Removal of Equipment
(1)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2)
Remove the safety barriers.
(3)
Remove the warning notice(s).
R 1EFF : 001-049, 051-099, 101-105, 151-154, 1 32-11-19Page 606 1201-207, 1May 01/05 1 1 1CES 1
MLG Sidestay Center Joint Links and Cuffs
Figure 602/TASK 32-11-19-991-007
R 1EFF : 001-049, 051-099, 101-105, 151-154, 1 32-11-19Page 607 1201-207, 1May 01/05 1 1 1CES 1 ACTUATING CYLINDER - MLG LOCKSTAY - REMOVAL/INSTALLATION
________________________________________________________
TASK 32-11-21-000-001
Removal of the MLG Lockstay Actuating Cylinder
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
R To remove the MLG lockstay actuating cylinder with the aircraft lifted on R jacks.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notice
No specific container 1 l (0.2641 USgal)
No specific access platform 2 m (6 ft. 7 in.)
460006437 1 TOOL-HOLDING
1EFF : ALL 1 32-11-21Page 401 1 1 Aug 01/05 1 1 1CES 1 B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
Transfer Unit (PTU) 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical Power 32-11-19-000-003 Disconnection of one end of the MLG Lock Springs from a MLG Side-Stay. 32-11-21-991-001 Fig. 401
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架2(83)
