(Ref. Fig. 401B/TASK 32-11-46-991-001-B)
1EFF : ALL 1 32-11-46Page 405 1 1 Aug 01/05 1 1 1CES 1
MLG Disconnection Box
Figure 401/TASK 32-11-46-991-001
R 1EFF : 001-049, 051-060, 101-101, 1 32-11-46Page 406 1 1 May 01/05 1 1 1CES 1
MLG Disconnection Box Figure 401A/TASK 32-11-46-991-001-A
R 1EFF : 061-099, 102-149, 151-199, 201-299, 1 32-11-46Page 407 1401-499, 1Aug 01/05 1 1 1CES 1
R MLG Disconnection Box
R Figure 401B/TASK 32-11-46-991-001-B
R 1EFF : 301-399, 1 32-11-46 Page 408
1 1 May 01/04
1 1
1CES 1
**ON A/C 001-049, 051-060, 101-101,
Subtask 32-11-46-020-051-C
A. Removal of the MLG Disconnection Box
(1)
Remove the screws (1) and remove the lid (4).
(2)
Remove the screw (14) and the cleat (15).
(3)
Disconnect the electrical connector (3) and remove the cable (13) from the box.
(4)
Put blanking caps on the disconnected electrical connectors.
(5)
Remove the screws (5) and (6) and disconnect the bonding straps (10).
(6)
Remove the screws (9) and then the four cable clips (11) from the harness.
(7)
Remove the electrical receptacle 4027VC (4028VC) from its retaining plate.
(8)
Remove the electrical receptacle 4031VC (4032VC) from its retaining plate.
(9)
Loosen the locknuts on the electrical connections (7), (8) and (12).
(10)
Carefully move the harness cable through the slots in the MLG disconnection box (16).
(11)
Hold the MLG disconnection box (16) and remove the screws (2).
(12) Remove the MLG disconnection box (16). R **ON A/C 061-099, 102-149, 151-199, 201-299, 401-499,
Subtask 32-11-46-020-051-B
A. Removal of the MLG Disconnection Box
(1)
Remove the screws (1) and lower the lid (4) on the lanyards.
(2)
Remove the screw (14) and the cleat (15).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-11-46Page 409 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(3)
Disconnect the electrical connector (3) and remove the cable (13) from the box.
(4)
Put blanking caps on the disconnected electrical connectors.
(5)
Remove the screws (5) and (6) and disconnect the bonding straps (10).
(6)
Remove the screws (9) and then the four cable clips (11) from the harness.
(7)
Remove the electrical receptacle 4027VC (4028VC) from its retaining plate.
(8)
Loosen the locknuts on the electrical connections (7), (8) and (12).
(9)
Carefully move the harness cable through the slots in the MLG disconnection box (16).
(10) Hold the MLG disconnection box (16) and remove the screws (2).
(11) Remove the MLG disconnection box (16). **ON A/C 301-399,
Subtask 32-11-46-020-051-D
A. Removal of the MLG Disconnection Box
(1)
Remove the screws (1) and remove the lid (4).
(2)
Remove the screw (14) and the cleat (15).
(3)
Disconnect the electrical connector (3) and remove the cable (13) from the box.
(4)
Put blanking caps on the disconnected electrical connectors.
(5)
Remove the screws (5) and (6) and disconnect the bonding straps (10).
(6)
Remove the screws (9) and then the four cable clips (11) from the harness.
(7)
Remove the electrical receptacle 4027VC (4028VC) from its retaining plate.
(8)
Loosen the locknuts on the electrical connections (7), (8) and (12).
R 1EFF : 061-099, 102-149, 151-199, 201-299, 1 32-11-46Page 410 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(9) Carefully move the harness cable through the slots in the MLG disconnection box (16).
(10)
Hold the MLG disconnection box (16) and remove the screws (2).
(11)
Remove the MLG disconnection box (16).
R 1EFF : 301-399, 1 32-11-46Page 411 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 32-11-46-400-001
Installation of the MLG Disconnection Box
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架2(127)
