(2)
Use LIFTING TACKLE (460006211) to install the shock absorber in the BUILD TROLLEY (460007240).
1EFF : ALL 1 32-11-13Page 467 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
4. Procedure
_________ R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 405/TASK 32-11-13-991-011-A)
**ON A/C 051-052,
(Ref. Fig. 405A/TASK 32-11-13-991-011)
**ON A/C 301-399,
(Ref. Fig. 405B/TASK 32-11-13-991-011-B) R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-13-020-059-A
A. Removal of the Sliding Tube Sub-Assembly of the MLG Shock Absorber
(1)
Lift and hold the upper diaphragm tube-assembly (3).
(2)
Move the bearing (15) out of its groove to get access to the pins
(14) and (17).
(3)
Use the ASSEMBLY AND EXTRACTION TOOL (460006409) to remove the pins
(14) 1 off and (17) 5 off.
(4)
Remove the upper diaphragm tube-assembly (3) together with the travel stop (16). Remove the travel stop (16).
(5)
Remove the bearing (15).
(6)
Remove the upper bearing housing (18) with the attached parts.
(7)
Remove the lower bearing housing (4) with the attached parts.
(8)
Remove and discard the wiper ring (13).
1EFF : ALL 1 32-11-13Page 468 1 1 Aug 01/05 1 1 1CES 1 (9) Remove the internal gland seals:
(a) Remove and discard the seals (8) and (9), the joint seal (11) and the sealing ring (10).
(10)
Remove the external gland seals:
(a) Remove and discard the retainers (6) and the packings (7).
(11)
Remove and discard the seals (1) and (2).
(12)
Release the lock washer (23).
(13)
Remove the sliding tube sub-assembly (24) from the BUILD TROLLEY.
(14)
Use the TORQUE ADAPTER (460006404) to remove the jacking dome (22).
(15)
Remove and discard the lock washer (23).
(16)
Remove the tube assembly (19) from the sliding tube sub-assembly (24).
(17) Remove and discard the O-ring (20) and the backing ring (21). **ON A/C 051-052,
Subtask 32-11-13-020-059
A. Removal of the Sliding Tube Sub-Assembly of the MLG Shock Absorber
(1)
Lift and hold the upper diaphragm tube-assembly (3).
(2)
Move the bearing (14) out of its groove to get access to the pins
(13) and (16).
(3)
Use the ASSEMBLY AND EXTRACTION TOOL (460006409) to remove the pins
(13) 1 off and (16) 5 off.
(4)
Remove the upper diaphragm tube-assembly (3) together with the travel stop (15). Remove the travel stop (15).
(5)
Remove the bearing (14).
(6)
Remove the upper bearing housing (17) with the attached parts.
(7)
Remove the lower bearing housing (4) with the attached parts.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-11-13Page 469 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Sliding Tube Sub-Assembly - Location and Detail
Figure 405/TASK 32-11-13-991-011-A12 (SHEET 1)
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 32-11-13Page 470 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
MLG Sliding Tube Sub-Assembly - Location and Detail
Figure 405/TASK 32-11-13-991-011-A22 (SHEET 2)
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 32-11-13Page 471 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R MLG Sliding Tube Sub-Assembly - Location and Detail R Figure 405A/TASK 32-11-13-991-011- 12 (SHEET 1)
R 1EFF : 051-052, 1 32-11-13Page 472 1 1 May 01/05 1 1 1CES 1R MLG Sliding Tube Sub-Assembly - Location and Detail R Figure 405A/TASK 32-11-13-991-011- 22 (SHEET 2)
R 1EFF : 051-052, 1 32-11-13Page 473 1 1 May 01/05 1 1 1CES 1
MLG Sliding Tube Sub-Assembly - Location and Detail R Figure 405B/TASK 32-11-13-991-011-B12 (SHEET 1)
R 1EFF : 301-399, 1 32-11-13Page 474 1 1 May 01/05 1 1 1CES 1
MLG Sliding Tube Sub-Assembly - Location and Detail R Figure 405B/TASK 32-11-13-991-011-B22 (SHEET 2)
R 1EFF : 301-399, 1 32-11-13Page 475 1 1 May 01/05 1 1 1CES 1
R (8) Remove and discard the wiper ring (12).
R (9) Remove the internal gland seals:
R (a) Remove and discard the seals (8) and (9), the joint seal (11) and
R the sealing ring (10).
R (10) Remove the external gland seals:
R (a) Remove and discard the retainers (6) and the packings (7).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架2(34)
