-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific safety barriers No specific warning notice No specific access platform 2.0 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical
Power 32-12-00-010-001 Open the Main Gear Doors for Access 32-41-11-000-006 Removal of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM)
1EFF : ALL 1 32-11-43Page 444 1 1 May 01/05R 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
32-42-57-000-001 Removal of the Tachometer
32-48-51-000-005 Removal of the Fan Assy (7GS,8GS,9GS,10GS)
32-49-18-000-001 Removal of the Rotating Mechanism
**ON A/C 001-003, 051-052,
32-11-43-991-028 Fig. 408 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-43-991-028-A Fig. 408A
**ON A/C ALL
32-11-43-991-029 Fig. 409
3. Job Set-up
__________
Subtask 32-11-43-941-055
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
1EFF : ALL 1 32-11-43Page 445 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-11-43-869-059
B. Flight Configuration Precautions
(1)
If the electrical power is not necessary for other maintenance tasks, de-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002). Then, it is not necessary to operate the LGCIU circuit breakers.
(2)
If the electrical power is necessary, do the precautions for flight configuration (Ref. TASK 32-00-00-860-001) before you open the circuit breakers.
Subtask 32-11-43-865-060
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU L/G/LGCIU/SYS1/NORM 1GA C09 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
R **ON A/C 001-049, 101-149, 151-199, 201-299,
Subtask 32-11-43-010-056
D. Get Access
(1)
Put the access platform in position adjacent to the applicable MLG, below zone 730 or 740.
(2)
Open the applicable access panel 574AB, 674AB.
(3)
Open the applicable MLG door (Ref. TASK 32-12-00-010-001).
(4)
Remove the applicable wheels (Ref. TASK 32-41-11-000-006).
(5)
Remove the applicable tachometers (Ref. TASK 32-42-57-000-001).
1EFF : ALL 1 32-11-43Page 446 1 1 May 01/05 1 1 1CES 1 **ON A/C 051-099,
Subtask 32-11-43-010-056-B
D. Get Access
(1)
Put the access platform in position adjacent to the applicable MLG, below zone 730 or 740.
(2)
Open the applicable access panel 574AB, 674AB.
(3)
Open the applicable MLG door (Ref. TASK 32-12-00-010-001).
(4)
Remove the applicable wheels (Ref. TASK 32-41-11-000-006).
(5)
Remove the applicable brake fan assemblies (Ref. TASK 32-48-51-000-005).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架2(120)
