________________________________________________
TASK 32-11-13-000-001
Removal of the MLG Shock Absorber
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking cap
No specific charging adapter
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notice
No specific warning notices
No specific 200 kg (440 lb) hand-operated forklift (angle of lift +10 to -10 degrees)
No specific access platform 3 m (9 ft. 10 in.)
No specific container 4 l (1.0566 USgal)
1EFF : ALL 1 32-11-13Page 401 1 1 May 01/04R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action
29-14-00-614-001 Depressurization of the Hydraulic Reservoirs
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-00-00-860-001 Flight Configuration Precautions with Electrical
Power
32-11-13-000-003 Removal of the MLG Shock-Absorber Gland-Seals
32-11-43-000-003 Removal of the 1M and 2M Harnesses from the MLG Axle
32-12-00-010-001 Open the Main Gear Doors for Access
32-41-11-000-006 Removal of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM)
32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM)
32-42-57-000-001 Removal of the Tachometer
32-42-71-000-001 Removal of the MLG Axle Adaptor-Sleeves
32-48-51-000-005 Removal of the Fan Assy (7GS,8GS,9GS,10GS)
32-49-18-000-001 Removal of the Rotating Mechanism
**ON A/C 001-003, 051-052,
R 32-11-13-991-001-C Fig. 401 **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-13-991-001-B Fig. 401A **ON A/C 001-003, 051-052,
R 32-11-13-991-002 Fig. 402 **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-13-991-002-A Fig. 402A
1EFF : ALL 1 32-11-13Page 402 1 1 Aug 01/05 1 1 1CES 1 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
**ON A/C 001-003, 051-052,
32-11-13-991-009 Fig. 403 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
32-11-13-991-009-A Fig. 403A
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-11-13-941-050
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the safety devices are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
(4)
Put the warning notices in the cockpit to tell persons not to operate the brakes.
(5)
Put the warning notices in position on the ground hydraulic services connections to tell persons not to operate the Green or the Yellow hydraulic systems.
1EFF : ALL 1 32-11-13Page 403 1 1 Aug 01/05 1 1 1CES 1 Subtask 32-11-13-860-050
B. Aircraft Maintenance Configuration
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架2(14)
