1_ For the flap track No.1 torque limiter:
- 193AB, 193BB
- 573BB (Ref. TASK 57-51-37-400-002).
2_ For the flap track No.2 torque limiter:
- 573AB, 573BB (Ref. TASK 57-51-37-400-002).
3_ For the flap track No.3 torque limiter:
- 575BB, 575CB (Ref. TASK 57-51-37-400-004).
4_ For the flap track No.4 torque limiter:
- 575FB, 575GB (Ref. TASK 57-51-37-400-004).
_ -194AB, 194BB
-673BB (Ref. TASK 57-51-37-400-002). 2 For the flap track No.2 torque limiter:
_
-673AB, 673BB (Ref. TASK 57-51-37-400-002). 3 For the flap track No.3 torque limiter:
_
-675BB, 675CB (Ref. TASK 57-51-37-400-004). 4 For the flap track No.4 torque limiter:
_
-675FB, 675GB (Ref. TASK 57-51-37-400-004). Subtask 27-50-00-942-054
D. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
1EFF : ALL 1 27-50-00Page 237 1 1 Nov 01/02R 1 1 1CES 1
(3) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
1EFF : ALL 1 27-50-00Page 238 1 1 Nov 01/02R 1 1 1CES 1
TASK 27-50-00-400-002 Installation of the Inboard and Outboard Flap Hoisting-Sling WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific hoist
No specific safety barriers
No specific warning notice
98A27508005001 1 HOISTING SLING - INBOARD FLAP
98A27508020001 1 HOISTING SLING - OUTBOARD FLAP
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground
27-50-00-866-011 Manual Extension of the Flaps
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
27-50-00-991-001 Fig. 204 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
**ON A/C 301-399,
27-50-00-991-001-A Fig. 204A
**ON A/C ALL
3. Job Set-up
__________
Subtask 27-50-00-941-056
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice in position to tell persons not to operate the flap/slat control lever.
Subtask 27-50-00-860-052
B. Aircraft Maintenance Configuration
(1) Make sure that the flaps are at the position 3 (Ref. TASK 27-50-00-866-008) or (Ref. TASK 27-50-00-866-011).
4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 204/TASK 27-50-00-991-001)
**ON A/C 301-399,
(Ref. Fig. 204A/TASK 27-50-00-991-001-A)
Hoisting Sling Details
Figure 204/TASK 27-50-00-991-001
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-50-00Page 241 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
R Hoisting Sling Details
R Figure 204A/TASK 27-50-00-991-001-A
R 1EFF : 301-399, 1 27-50-00 Page 242
1 1 May 01/04
1 1
1CES 1
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 27-50-00-480-051
A. Installation of the Inboard Flap Hoisting Sling
(1)
Remove the blanking caps from the flap.
(2)
Remove the pip-pins (11) and the lifting-lugs (12) from the HOISTING SLING - INBOARD FLAP (98A27508005001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵4
