R 1EFF : 051-051, 1 27-54-00Page 629 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL
TASK 27-54-00-200-003
Detailed Dimensional Check - Free Movement at the Trailing Edge of the Flaps
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job
__________________
To check for flap backlash
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adhesive tape
No specific aluminum pin
No specific safety barriers
No specific warning notice
No specific adjustable access platform 3.0 m (9 ft. 10 in.)
R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
(8.00 to 75.00 lbf.ft)
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific Torque Wrench : range 2.00 to 20.00 m.daN
(15.00 to 150.00 lbf.ft) 98D27504114000 1 DISTANCE GAUGES 98D27504115000 1 DISTANCE GAUGES
B. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
1 cotter pin 57-52-23 03 -270
6 cotter pin 57-52-23 03 -360
R 30 cotter pin 57-51-05 89F-010 44 cotter pin 27-54-46 22 -095 80 cotter pin 27-54-46 24 -095 176 cotter pin 27-54-05 35C-060 176 cotter pin 27-54-05 35C-060A 176 cotter pin 27-54-05 35H-060 187 cotter pin 27-54-05 33F-025 215 cotter pin 27-54-05 35C-060 215 cotter pin 27-54-05 35C-060A 215 cotter pin 27-54-05 35H-060 231 cotter pin 27-54-05 32A-040 231 cotter pin 27-54-05 32A-090
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 27-50-00-866-011 Manual Extension of the Flaps 27-50-00-866-012 Manual Retraction of the Flaps 27-51-44-400-001 Installation of the Interconnecting Strut 27-54-46-000-001 Removal of the Nos. 2, 3 and 4 Flap Carriages 27-54-46-000-002 Removal of the No.1 Flap Carriage 27-54-46-400-001 Installation of the Nos 2, 3 and 4 Flap Carriages 27-54-46-400-002 Installation of the No.1 Flap Carriage 27-54-49-000-001 Removal of the Flap Track 1 Actuator 6205CM(6255CM) 27-54-49-000-002 Removal of the Flap Track 2 Actuator 6211CM(6261CM)
R 1EFF : ALL 1 27-54-00Page 631 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-54-49-000-003 Removal of the Flap Track 3 Actuator 6221CM(6271CM)
27-54-49-000-004 Removal of the Flap Track 4 Actuator 6233CM(6283CM)
27-54-49-400-001 Installation of the Flap Track 1 Actuator
6205CM(6255CM)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵4(165)