(2)
Put the warning notices in the cockpit to tell persons not to operate the flight controls.
(3)
Put the access platform in position.
(4)
Open and safety the access panels 325DL or 325DR.
Subtask 12-22-55-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16
4. Procedure
_________
(Ref. Fig. 301/TASK 12-22-55-991-001) Subtask 12-22-55-640-050
A. Lubricate the rudder hinge bearing No. 6.
(1)
Clean the grease nipple with a clean cloth.
(2)
Lubricate with COMMON GREASE (Material No. 04-004) through the grease nipple.
(3)
Remove the unwanted grease with a clean cloth.
5. Close-up
________ Subtask 12-22-55-410-051
A. Get Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access panels 325DL or 325DR.
(3)
Remove the warning notice(s).
(4) Remove the access platform(s). Subtask 12-22-55-865-051
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03
121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16
Rudder Hinge Bearing No. 6
Figure 301/TASK 12-22-55-991-001
1EFF : ALL 1 12-22-55 Page 304
1 1 Feb 01/98
1 1
1CES 1
WINDOWS - SERVICING
___________________
TASK 12-22-56-600-001
R Lubrication of the Cockpit Sliding Window Tracks
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL MATERIALS
_______
ONLY WITH A GOOD SUPPLY OF AIR.
OBEY THE MANUFACTURERS INSTRUCTIONS.
PUT ON PROTECTIVE CLOTHING.
DO NOT GET THEM IN YOUR MOUTH.
DO NOT SMOKE.
DO NOT BREATHE THE GAS.
THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
1. Reason for the Job
__________________
Refer to the MPD TASK: 561200-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific brush
No specific clean and dry cloth
No specific access platform 3.45 m (11 ft. 4 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-012 USA VV-P-236 PURE MINERALVASELINE OR PETRO- LATUM (Ref. 20-31-00) R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
56-12-11-000-001 Removal of the Sliding Windows
56-12-11-400-001 Installation of the Sliding Windows
12-22-56-991-001 Fig. 301
3. Job Set-up__________
Subtask 12-22-56-941-050
A. Get Access
(1) Put the access platform in position opposite the forward passenger/crew door. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320飞机维护手册 AMM SERVICING 2(36)