Removal/Installation of the Protective Covers Figure 306/TASK 12-22-27-991-004
1EFF : 1 1R 1CES ALL 1 11 1 12-22-27 Page 335 May 01/04
Control Chains Figure 307/TASK 12-22-27-991-005- 12 (SHEET 1)
1EFF : 1 1R 1CES ALL 1 11 1 12-22-27 Page 336 May 01/04
Control Chains Figure 307/TASK 12-22-27-991-005- 22 (SHEET 2)
R 1EFF : 1 1 1CES ALL 1 111 12-22-27 Page 337 May 01/04
Subtask 12-22-27-942-057
C. Put the aircraft back to the serviceable condition.
(1) On the center pedestal, remove the PITCH TRIM CONTROL LOCKING. Subtask 12-22-27-410-055
D. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access doors 811, 312AR.
(3)
Remove the access platform(s).
R 1EFF : ALL 1 12-22-27Page 338 1 1 May 01/04 1 1 1CES 1
R **ON A/C 001-049, 051-061, 101-105, 201-203,
TASK 12-22-27-640-008
Remove Flap Rotary Actuators For Regreasing
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job
__________________
Refer to the MPD TASK: 275449-05
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific warning notice
No specific warning notice(s)
No specific access platforms 2.8 m (9 ft. 2 in.)
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 12-22-27Page 339 1 1 May 01/05 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-50-00-866-008 27-54-49-000-008
27-54-49-400-005
27-60-00-866-002 32-00-00-481-001
32-12-00-010-001 32-12-00-410-001 57-51-37-000-002
57-51-37-000-004
57-51-37-400-002
57-51-37-400-004
CMM 27-53-23
CMM 27-53-24
CMM 27-53-25
CMM 27-53-26
3. Job Set-up
__________ Subtask 12-22-27-941-057
A. Safety Precautions
Extension of the Flaps on the GroundRemoval of the Flap Track 1 to 4 Actuators 6205CM(6255CM)/6211CM(6261CM)/ 6221CM(6271CM)/6233CM(6283CM)Installation of the Flap Track 1 to 4 Actuators 6205CM(6255CM)/6211CM(6261CM)/ 6221CM(6271CM)/6233CM(6283CM)Extension-Retraction of the Spoilers for MaintenanceInstallation of the Safety Devices on the Landing GearsOpen the Main Gear Doors for AccessClose the Main Gear Doors after AccessRemoval of the Access Panels 573AB(673AB), 573BB(673BB), 573CB(673CB)Removal of the Access Panels 575AB/575BB/575CB/575DB/575EB/575FB/575GB/575HB (675AB/675BB/675CB/675DB/675EB/675FB/675GB/675HB)Installation of the Access Panels 573AB(673AB), 573BB(673BB), 573CB(673CB)Installation of the Access Panels 575AB/575BB/575CB/575DB/575EB/575FB/575GB/ 575HB (675AB/675BB/675CB/675DB/675EB/675FB/675GB/675HB)
(1)
Put the safety barriers in position.
(2)
Put the warning notice(s) in position to tell persons not to operate the flaps.
(3)
Put a warning notice in position to tell persons not to operate the landing gear doors.
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 12-22-27Page 340 1 1 May 01/05 1 1 1CES 1
(4) Make sure that the the ground safety locks are installed on the landing gear (Ref. TASK 32-00-00-481-001).
Subtask 12-22-27-860-051
B. Aircraft Maintenance Configuration WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM SERVICING 2(10)