B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R Material No. 04-004 Material No. 04-017 Material No. 05-027 Material No. 19-003 USA MIL-PRF-23827 TYPE I SYNTH.ESTER BASED GREASE HIGH PRESSURE (Ref. 20-31-00)USA A-A-59173 SILICONE GREASE (Ref. 20-31-00)USA MIL-L-81309 RUST INHIBITOR(FOR CORROSION USE 15-004) (Ref. 20-31-00) USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 52-10-00-010-001 52-10-00-410-001 52-10-00-860-001 52-10-00-860-002 12-22-52-991-008 12-22-52-991-006 Opening of the Passenger/Crew DoorClosing of the Passenger/Crew DoorSpecial Precautions before Work on the Passenger/Crew DoorSpecial Precautions after Work on the Passenger/Crew DoorFig. 304 Fig. 305
3. Job Set-up__________
Subtask 12-22-52-010-056
A. Get Access
(1) Open the applicable passenger/crew door as required (Ref. TASK 52-10-00-010-001).
(2) Make sure that the control handle of the emergency-escape slide at the applicable passenger/crew door is safetied in the disarmed position (Ref. TASK 52-10-00-860-001).
(3) Make sure that the access platform is in position below the opened passenger/crew door.
R 1EFF : ALL 1 12-22-52Page 319 1 1 May 01/05 1 1 1CES 1
4. Procedure
_________
Subtask 12-22-52-640-055
R A. Lubrication of the External Control Handle and the Telescopic Arm
(1) Lubricate the external control handle as follows:
(Ref. Fig. 304/TASK 12-22-52-991-008)
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE_______
R THIS/THESE MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES AND GOGGLES.
(a) Make sure that the external control handle of the applicable
passenger/crew door is in the horizontal position.
R (b) Apply the COMMON GREASE (Material No. 04-017) to the control
R mechanism of the external control handle.
R (c) Apply the rust inhibitor SPECIAL MATERIALS (Material No. 05-027)
R to the inner surfaces and the adjacent area of the applicable
R external control handle.
R (d) Remove the unwanted grease with a lint-free cotton cloth
R MISCELLANEOUS (Material No. 19-003).
R
R (2) Lubricate the telescopic arm of the door damper and emergency
R operation cylinder as follows:
R (Ref. Fig. 305/TASK 12-22-52-991-006)
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE_______
R THIS/THESE MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES AND GOGGLES.
R (a) Clean the lubrication fitting (1) with a lint-free cotton cloth
R MISCELLANEOUS (Material No. 19-003).
R (b) Pump the GUN - GREASE until the new grease COMMON GREASE
R (Material No. 04-004) comes out to lubricate the telescopic arm.
R (c) Remove the unwanted grease with a lint-free cotton cloth
R MISCELLANEOUS (Material No. 19-003).
R 1EFF : ALL 1 12-22-52Page 320 1 1 May 01/05 1 1 1CES 1
Lubrication of the External Control Handles-FWD and AFT Passenger/Crew Doors Figure 304/TASK 12-22-52-991-008
R 1EFF : ALL 1 12-22-52Page 321 1 1 May 01/05 1 1 1CES 1
R R Lubrication of the Telescopic Arm Figure 305/TASK 12-22-52-991-006
1EFF : 1 1 1CES ALL 1 111 12-22-52 Page 322 May 01/05
5. Close-up
________
Subtask 12-22-52-410-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Do the special precautions on the passenger/crew door after maintenance (Ref. TASK 52-10-00-860-002).
(3)
Close the applicable passenger/crew doors (Ref. TASK 52-10-00-410-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM SERVICING 2(27)
