R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 528 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
3. Job Set-up
__________ Subtask 31-60-00-861-057
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002).
Subtask 31-60-00-860-061-A
B. Aircraft Maintenance Configuration
(1)
Do the EIS start procedure (Ref. TASK 31-60-00-860-001). Subtask 31-60-00-860-064
C.
Aircraft Maintenance Configuration
(1) Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).
(2)
Do the IRS alignment procedure (Ref. TASK 34-10-00-860-004) Subtask 31-60-00-860-065
D.
Aircraft Maintenance Configuration
(1)
On the panel 115VU, make sure that the ENG MASTER 1 and ENG MASTER 2 switches are at OFF.
(2)
On the maintenance panel 50VU, release the ENG/FADEC GND PWR 1 & 2 pushbutton switches (the ON legend comes on).
**ON A/C 001-049, 101-105,
Subtask 31-60-00-860-066
E. Aircraft Maintenance Configuration
(1) On the center pedestal, on the radar control unit, set:
-
the ON/OFF switch to ON
-
the mode selector switch (WX/TURB) to WX.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 529 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1R **ON A/C 051-099, 106-149, 201-299, 301-399,
Subtask 31-60-00-860-066-A
E. Aircraft Maintenance Configuration
(1) On the center pedestal, on the radar control unit, set:
-
the SYS 1/OFF/SYS 2 selector switch to SYS 1
-
the MODE selector switch to WX
-the PWS switch on AUTO.
**ON A/C 151-199,
Subtask 31-60-00-860-066-B
E. Aircraft Maintenance Configuration
(1) On the center pedestal, on the radar control unit, set:
-the ON/OFF switch to ON
-the MODE selector switch to WX.
**ON A/C 001-049, 101-105, 151-199,
Subtask 31-60-00-860-067
F. Aircraft Maintenance Configuration
(1) On the ATC/TCAS control unit, set:
-
the ATC AUTO switch to STBY
-
the TCAS mode selector switch to STBY
-the ALT RPTG selector switch to OFF. R **ON A/C 051-099, 106-149, 201-299, 301-399,
Subtask 31-60-00-860-067-A
F. Aircraft Maintenance Configuration
(1) On the ATC/TCAS control unit, set the ATC/TCAS mode selector switch to SBY.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 530 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Subtask 31-60-00-865-055
G. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU COM NAV/ATC/1 5SH1 G11 121VU COM NAV/TCAS 4SG K10 121VU COM NAV/ATC/2 5SH2 K07
Subtask 31-60-00-860-068
H. Aircraft Maintenance Configuration
(1) On one MCDU, get the SYSTEM REPORT/TEST INST menu page (Ref. TASK 31-32-00-860-008)
4. Procedure
_________
Subtask 31-60-00-740-050
A. EIS Input Test
NOTE : This test is for the DMC1. For the DMC2 use the indications
____
between parentheses.
For the DMC3 a special procedure is used.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU, on the INST menu page:
-
push the line key adjacent to - make sure that:
the EIS1 (2) indication. * the CAPT (F/O) PFD and ND and the upper (lower) ECAM DU operate in the maintenance mode. * on the MCDU, the EIS DMC1 (EIS DMC2) page comes into view.
-
push the line key adjacent to - on the MCDU, the EIS DMC1 TEST (EIS the TEST indication. DMC2 TEST) page comes into view.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 531 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push the line key adjacent to the I/P TEST indication.
-
push the line key adjacent to the RETURN indication as necessary to have the INST page again
2.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 7(85)
