R 1EFF : 401-499, 1 31-60-00Page 208 1 1 Aug 01/05 1 1 1CES 1
4. Procedure
_________ Subtask 31-60-00-740-063
A. LRU Identification Check of the EIS Components
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU: On the MCDU:
- push the line key adjacent to the EIS1 (EIS2) indication - the DMC1 (DMC2) main menu page comesinto view. On CAPT PFD, CAPT ND, upper and lower ECAM DUs:
- the green MAINTENANCE MODE indication comes into view.
- push the line key adjacent to the LRU IDENT indication - the DMC1 (DMC2) LRU IDENTIFICATION1/5 page comes into view with the P/N of the DMC1 and DMC2 (the LRU IDENTIFICATION page gives the hardware and software P/Ns for each EIS component).
- record the P/N then push the down arrow key to get the subsequent pages - the DMC1 (DMC2) LRU IDENTIFICATION2/5 page comes into view with theP/Ns of the DMC3 and the DU PFD CAPT - the DMC1 (DMC2) LRU IDENTIFICATION 3/5 page comes into view with the P/Ns of the DU ND CAPT and the DU PFD F/O - the DMC1 (DMC2) LRU IDENTIFICATION 4/5 page comes into view with the P/Ns of the DU ND F/O and the DU EWD - the DMC1 (DMC2) LRU IDENTIFICATION 5/5 page comes into view with the P/Ns of the DU SD
- push the line key adjacent to the RETURN indication
R 1EFF : 401-499, 1 31-60-00Page 209 1 1 Aug 01/05 1 1 1CES 1
5. Close-up
________ Subtask 31-60-00-860-096
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the MAINTENANCE MENU 1/2 page comes into view.
(2)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(3)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
R 1EFF : 401-499, 1 31-60-00Page 210 1 1 Aug 01/05 1 1 1CES 1 ELECTRONIC INSTRUMENT SYSTEM (EIS) - SERVICING
______________________________________________
TASK 31-60-00-610-001
X LOADING Procedure of the DMC1 to the PFD CAPT, ND CAPT, the EWD or the SD
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
31-32-00-860-008 Procedure to Get Access to the SYSTEM
REPORT/TEST/INST Page 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
3. Job Set-up
__________ Subtask 31-60-00-869-065
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002)
(2)
Do the EIS start procedure (Ref. TASK 31-60-00-860-001)
(3)
On one MCDU, get the SYSTEM REPORT/TEST INST menu page (Ref. TASK 31-32-00-860-008)
(4)
On the switching panel 8VU, make sure that all the switches are set to NORM.