R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 506 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
R R R R R R R R R R 121VU EIS/DMC3/SPLY 121VU EIS/DMC2/SPLY 121VU EIS/ECAM DU/LOWER/SPLY 121VU EIS/ECAM DU/LOWER/SWTG 121VU EIS/DMC2/SWTG 121VU EIS/ND/F/O/SWTG 121VU EIS/PFD/F/O/SWTG 121VU EIS/ND/F/O 121VU EIS/PFD/F/O 122VU ELEC/AC/BUS1/CTL 10WT3 10WT2 13WT2 24WT2 21WT2 23WT2 22WT2 12WT2 11WT2 17XN1 Q09 Q08 R11 R10 R08 R06 R05 R04 R03 V25
Subtask 31-60-00-869-055
C. On the panels 301VU and 500VU and on the ECAM control panel: - set all the potentiometers to the center position.
4. Procedure_________
Subtask 31-60-00-710-051
A. Automatic PFD/ND Transfer
NOTE : This test is for the CAPT side. For the F/O side, use the____ indications between parentheses.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the panel 301VU (500VU):
- set the PFD potentiometer to - the PFD is stopped and the PFD image
OFF. moves to the ND.
- set the PFD potentiometer to - after some seconds, the images go to
the center position. their initial configuration.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 507 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 Subtask 31-60-00-710-052
B. Manual PFD/ND Transfer
NOTE : This test is for to the CAPT side. For the F/O side, use the
____
indications between parentheses.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the panel 301VU (500VU):
-
push then release the PFD/ND/XFR pushbutton switch.
-
push then release the PFD/ND/XFR pushbutton switch.
Subtask 31-60-00-710-053
C. Manual ECAM/ND Transfer
- on the PFD:
* the ND image comes into view. - on the ND:
* the PFD image comes into view.
-the PFD and ND images go to theirinitial position.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the center pedestal, on the SWITCHING panel 8VU:
-
set the ECAM/ND/XFR selector switch to CAPT.
-
set the ECAM/ND/XFR selector switch to F/O.
- on the lower ECAM DU:
* the ENGINE/WARNING image comes into view. The system page comes into view on the CAPT ND.
- on the upper ECAM DU:
* the diagonal line comes into view.
- on the upper ECAM DU:
* the ENGINE/WARNING image comes into
view. - on the lower ECAM DU:
* the diagonal line comes into view and the system image comes into view on the F/O ND.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 31-60-00Page 508 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-set the ECAM/ND/XFR selector - the DUs go to their initial
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 指示/记录系统 7(78)