A320飞机维护手册 AMM HYDRAULIC POWER 液压2(86)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R (Ref. TASK 29-23-00-860-001).
R (5) Open one of the main doors of the main gear (Ref. TASK 32-12-00-010-
R 001).
R (6) Put the ACCESS PLATFORM 3M (10 FT) in position.
R (7) Put the CONTAINER 1 L (1/4 USGAL) below the filter to collect the
R unwanted hydraulic fluid.
R 4. Procedure_________
R (Ref. Fig. 301/TASK 29-11-45-991-001)
R Subtask 29-11-45-020-051
R A. Removal of the Clogging Indicator
R (1) Loosen and remove the clogging indicator (4) from the filter head
R (1).
R (2) Remove and discard the packings (7) from the clogging indicator (4).
R (3) Remove and retain the ring (6) from the clogging indicator (4).
R Subtask 29-11-45-560-051
R B. Preparation for Installation
R (1) Put the ring (6) on the clogging indicator (4).
R (2) Lubricate the new packings (7) with the HYDRAULIC FLUIDS (Material
R No. 02-003) and install them on the clogging indicator (4).
R (3) Lubricate the threads of the clogging indicator (4) with the
R HYDRAULIC FLUIDS (Material No. 02-003).

R Subtask 29-11-45-420-051

R C. Installation of the Clogging Indicator
R (1) Clean the component interface and/or the adjacent area.
R (2) Do an inspection of the component interface and/or the adjacent area.
R (3) Install the new clogging indicator (4) in the filter head (1).
R Subtask 29-11-45-942-052
R D. Safety Precautions
R (1) Remove the warning notice(s).
R Subtask 29-11-45-790-051
R E. Test of the Filter Assembly
R (1) Presssurize the reservoir of the Green hydraulic system (Ref. TASK
R 29-14-00-614-002).
R (2) Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).
R (3) Make sure that the clogging indicator stays in.
R (4) Make sure that no hydraulic fluid comes out of the filter assembly.
R (5) Depressurize the Green hydraulic system (Ref. TASK 29-10-00-864-001).
R 5. Close-up________
R Subtask 29-11-45-860-054
R A. Put the aircraft back to the serviceable condition.
R (1) Make sure that the fluid level in the Green reservoir is correct. Add
R fluid as necessary (Ref. TASK 12-12-29-611-001).
R (2) Remove the container from below the filter.
R (3) Connect the PTU isolation coupling (Ref. TASK 29-23-00-860-002).
R (4) Make sure that the work area is clean and clear of tool(s) and other
R items.

R (5) Remove the access platform(s).
R (6) Close the main door of the main gear (Ref. TASK 32-12-00-410-001).

SLIDE - COMPENSATED (1010GM) - REMOVAL/INSTALLATION
___________________________________________________
TASK 29-11-47-000-001
Removal of the Compensated Slide 1010GM
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS

-
THE FLIGHT CONTROL SURFACES

-
THE LANDING GEAR AND THE RELATED DOORS

-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs No specific safety barriers No specific warning notice No specific access platform 3 m (9 ft. 10 in.) No specific container 5 l (1.3208 USgal)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
Transfer Unit (PTU) 29-11-47-991-001 Fig. 401
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM HYDRAULIC POWER 液压2(86)