A320飞机维护手册 AMM HYDRAULIC POWER 液压2(58)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific container No specific warning notices No specific access platform 2.6 m (8 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-10-00-680-001 Drainage of the Reservoir of the Green Hydraulic
 System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
 Transfer Unit (PTU) 32-12-00-010-001 Open the Main Gear Doors for Access
 1EFF : ALL 1 29-11-41Page 401 1 1 Nov 01/98R 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
**ON A/C 001-003, 051-054,
 29-11-41-991-001 Fig. 401 R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 29-11-41-991-001-A Fig. 401A
 **ON A/C 001-003, 051-054,
 29-11-41-991-002 Fig. 402 R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 29-11-41-991-002-A Fig. 402A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 29-11-41-865-050

 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU HYDRAULIC/LOW/LVL/IND 1832GQ N32 121VU HYDRAULIC/HYD/QTY/IND 1831GQ P35 121VU HYDRAULIC/G HYD/PUMP ENG1/CTL 1701GK R35 121VU HYDRAULIC/G HYD/PUMP ENG1/MONG 1702GK R34 Subtask 29-11-41-860-050

 B. Aircraft Maintenance Configuration
 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.

_______
 (1)
 Obey the hydraulic safety procedures (Ref. TASK 29-00-00-910-002).

 (2)
 Put the warning notices in position to tell persons not to pressurize the Green hydraulic system:

 -in the cockpit on the hydraulic section 40VU of the overhead panel, - on the ground service panel of the Green hydraulic system.

 (3)
 Open the main doors of the main gear (Ref. TASK 32-12-00-010-001).

 (4)
 Make sure that the Green hydraulic system is depressurized and put it in the maintenance configuration. (Ref. TASK 29-00-00-864-001).

 (5)
 Depressurize the reservoir of the Green hydraulic system (Ref. TASK 29-14-00-614-001).

 (6)
 Put the access platform in position at the main doors of the main gear.

 (7)
 Put a container below the reservoir.

 (8)
 Disconnect the isolation coupling of the Power Transfer Unit (PTU) (Ref. TASK 29-23-00-860-001).

 (9)
 Drain the reservoir of the Green hydraulic system (Ref. TASK 29-10-00-680-001).

 4. Procedure
_________
 **ON A/C 001-003, 051-054,

 (Ref. Fig. 401/TASK 29-11-41-991-001) R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 401A/TASK 29-11-41-991-001-A)

 Reservoir of the Green Hydraulic System (Sheet 1)
 Figure 401/TASK 29-11-41-991-001

R 1EFF : 001-003, 051-054, 1 29-11-41Page 404 1 1 May 01/05 1 1 1CES 1

 Reservoir of the Green Hydraulic System (Sheet 1) Figure 401A/TASK 29-11-41-991-001-A
R 1EFF : 004-049, 055-099, 101-149, 151-199, 1 29-11-41Page 405 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 001-003, 051-054,

 (Ref. Fig. 402/TASK 29-11-41-991-002) R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499,
 (Ref. Fig. 402A/TASK 29-11-41-991-002-A)
 **ON A/C ALL

 Subtask 29-11-41-020-055
 A. Removal of the Reservoir CAUTION : USE A SECOND WRENCH TO APPLY COUNTERTORQUE TO THE UNION WHEN
_______ YOU DISCONNECT/CONNECT HYDRAULIC LINES ON UNIONS. IF YOU USE THE SECOND WRENCH, YOU WILL NOT LOOSEN OR TIGHTEN THE UNION TOO MUCH.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM HYDRAULIC POWER 液压2(58)