R 1EFF : 001-001, 004-049, 051-099, 101-149, 1 05-51-16Page 605
1151-199, 201-299, 401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.|
| |CODE| | 1 | 2 | 3 |SIGN|FIG.|
|----|----|---------------------------------------|-----|-----|-----|----|----|
R | | | (Ref. TASK 32-41-11-000-006). | | | | | |
R | | | (Refer to the manufacturer's | | | | | |
| | | instructions for the overhaul | | | | | |
| | | procedure). | | | | | |
R | | | NOTE: If fuse plug is melted, also | | | | | |
| | | remove the adjacent wheel for| | | | | |
| | | overhaul. | | | | | |
| | |(2) Remove the brake for overhaul | X | | | | |
R | | | (Ref. TASK 32-42-27-000-001). | | | | | |
R | | | (Refer to the manufacturer's | | | | | |
| | | instructions for the overhaul | | | | | |
| | | procedure). | | | | | |
| | |(3) Remove the axle sleeve | X | | | | |
R | | | (Ref. TASK 32-42-71-000-001). | | | | | |
| | |(4) Do the Inspection of the MLG Axles | X | | | | |
| | | after Brake Overheat | | | | | |
R | | | (Ref. TASK 32-11-00-200-007). | | | | | |
| | |(5) Examine the axle sleeve for | X | | | | |
R | | | distortion and damaged surface. | | | | | |
| | |(6) Installation of the removed | | | | | |
R | | | components | | | | | |
| | | (a) Install serviceable components:| | | | | |
| | | - for the axle sleeve | | | | | |
| | | (Ref. TASK 32-42-71-400-001) | | | | | |
| | | - for the brakes | | | | | |
| | | (Ref. TASK 32-42-27-400-001) | | | | | |
| | | - for the wheels | | | | | |
R | | | (Ref. TASK 32-41-11-400-006). | | | | | |
-------------------------------------------------------------------------------
**ON A/C 002-003,
Subtask 05-51-16-210-051-A
R B. Inspection of the Wheels and Brakes
CAUTION : DO NOT TRY TO APPLY PRESSURE TO THE BRAKES WHEN THE ROTORS ARE_______
NOT ALIGNED.
(Ref. TASK 32-42-27-000-001) (Ref. TASK 32-42-27-400-001) (Ref. TASK 32-
42-27-210-006) (Ref. TASK 32-41-11-000-006) (Ref. TASK 32-41-11-400-006)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 05-51-16Page 606 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 (Ref. TASK 32-42-71-000-001) (Ref. TASK 32-42-71-400-001) (Ref. TASK 32-11-00-200-007)
-------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| R | A.| |Inspection after the melting of the | | | | | | R | | |183 deg.C (361.4 deg.F) fuse plug(s) | | | | | | R | | |and the reported cockpit indication of | | | | | | R | | |the brakes temperature not more than | | | | | | R | | |900 deg.C (1652 deg.F) | | | | | | | | | | | | | | | | | |(1) Remove the related wheel and the | X | | | | | R | | | adjacent wheel for overhaul | | | | | | R | | | (Ref. TASK 32-41-11-000-006). | | | | | | R | | | (Refer to the manufacturer's | | | | | | | | | instructions for the overhaul | | | | | | | | | procedure). | | | | | | | | |(2) Examine the brake unit for damage | X | | | | | R | | | or distortion | | | | | | R | | | (Ref. TASK 32-42-27-210-006). | | | | | | R | | | (a) Make sure that there is no | | | | | | R | | | hydraulic fluid leakage at the | | | | | | R | | | piston, liners, supply lines, | | | | | | R | | | self-blanking unions and bleed | | | | | | R | | | screws. | | | | | | R | | | (b) Clean the piston housing with | | | | | | | | | a cloth and make sure it is in | | | | | | | | | the correct condition (no | | | | | | | | | separation, no blisters). | | | | | | R | | | (c) Make sure that the heat pack is| | | | | | | | | serviceable: | | | | | | | | | - carbon integrity | | | | | | | | | - free movement of the rotor | | | | | | R | | | discs | | | | | | | | | - cracks or signs of oxidation | | | | | | R | | | on the part of the rotor | | | | | | R | | | discs you can see. | | | | | | R | | | NOTE: Be careful with the | | | | | | | | | discs to prevent damage| | | | | | | | | to the protective | | | | | | | | | finish (anti-oxidation | | | | | | R | | | paint). | | | | | | | | |If you find damage: | | | | | | R | | |- Remove the damaged brake unit for | | X | | | | R | | | overhaul | | | | | |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 2(46)
