-------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| | | | area for distortion and damage. | | | | | | | | | | | | | | | | B.| | Examine all the pipes, the hoses, the | | X | | | | | | | ducts, electrical looms and mountings | | | | | | | | | in the wing trailing edge area for | | | | | | | | | distortion, cracks, failure and | | | | | | | | | leakage. | | | | | | | | | | | | | | | |3. | | Inspection of the wing tip | | | | | | | | | | | | | | | | A.| | Examine the upper and lower skin | X | | | | | | | | panels of the wing tip for distortion,| | | | | | | | | cracks, pulled or torn fasteners and | | | | | | | | | damaged paintwork. | | | | | | | | | If you find damage: | | | | | | | | | (1) Get access to the other side of | | X | | | | | | | the damaged area. | | | | | | | | | (2) Examine internally the related | | X | | | | | | | area for distortion and damage. | | | | | | -------------------------------------------------------------------------------
Subtask 05-51-13-210-053
C. Inspection of the Flap System (Ref. Fig. 601/TASK 05-51-13-991-001, 602/TASK 05-51-13-991-002, 603/TASK 05-51-13-991-005, 604/TASK 05-51-13-991-006) (Ref. TASK 27-54-00-200-001) (Ref. TASK 27-54-46-200-001) (Ref. TASK 57-26-00-200-001) (Ref. TASK 57-26-00-200-006) (Ref. TASK 28-25-00-650-001)
-------------------------------------------------------------------------------|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.| | |CODE| | 1 | 2 | 3 |SIGN|FIG.| |----|----|---------------------------------------|-----|-----|-----|----|----| |1. | | Inspection of the flap assemblies and | | | | | | | | | flap transmission system | | | | | | | | | | | | | | | | A.| | Examine the upper and lower skin of | X | | | | | | | | the inboard and outboard flaps for | | | | | | | | | distortion, cracks, pulled or torn | | | | | | | | | fasteners, skin/honeycomb-core | | | | | | | | | delamination and damaged paintwork. | | | | | | | | | | | | | | |
1EFF : ALL 1 05-51-13Page 605 1 1 May 01/02R 1 1 1CES 1
Component Location of the Flap System Figure 601/TASK 05-51-13-991-001
1EFF : 1 1R 1CES ALL 1 11 1 05-51-13 Page 606 Nov 01/98
Flap Components Figure 602/TASK 05-51-13-991-002
1EFF : 1 1R 1CES ALL 1 11 1 05-51-13 Page 607 Nov 01/98
Track No. 1 Actuator Figure 603/TASK 05-51-13-991-005
1EFF : 1 1R 1CES ALL 1 11 1 05-51-13 Page 608 Nov 01/98
Typical Installation of the Actuator Figure 604/TASK 05-51-13-991-006
1EFF : 1 1R 1CES ALL 1 11 1 05-51-13 Page 609 Nov 01/98
-------------------------------------------------------------------------------
|ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.|
| |CODE| | 1 | 2 | 3 |SIGN|FIG.|
|----|----|---------------------------------------|-----|-----|-----|----|----|
| B.| | Examine the flap to carriage | X | | | | |
| | | attachmemt fittings for distortion, | | | | | |
| | | cracks and damage. | | | | | |
| | | | | | | | |
| C.| | Examine the torque limiter indicators.| X | | | | |
| | | Make sure that they are not extended. | | | | | |
| | | | | | | | |
| | | If you find damage on items A. to C.: | | | | | |
| | | (1) Examine the flap transmission | | X | | | |
| | | assy (Ref. TASK 27-54-00-200-001) | | | | | |
| | | for distortion and damage. | | | | | |
| | | If you find damage in the trans-| | | | | |
| | | mission system: | | | | | |
| | | - remove the system actuators, the| | | X | | |
| | | shafts, the bearings and the | | | | | |
| | | gear boxes for component | | | | | |
| | | maintenance. | | | | | |
| | | (2) Examine the flap tracks and | | X | | | |
| | | rollers for distortion and damage | | | | | |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 时间限制/维护检查 2(27)
