R Subtask 05-51-25-010-052
R E. Get Access
R (1) Open the main gear doors and install the safety devices (Ref. TASK
R 32-12-00-010-001).
R (2) Open the nose gear doors and install the safety devices (Ref. TASK
R 32-22-00-010-001).
R Subtask 05-51-25-860-053
R F. Aircraft Maintenance Configuration
R (1) Make sure that hydraulic systems are depressurized
R (Ref. TASK 29-00-00-864-001)
R (2) De-energize the aircraft electrical circuits
R (Ref. TASK 24-41-00-862-002).
R (3) Put warning notices in the cockpit to tell persons not to operate the
R systems.
R (4) Put an adjustable access platform in position near the area you must
R inspect.
R 4. Procedure_________
R Subtask 05-51-25-160-052
R A. Cleaning of the Aircraft
R CAUTION : DO NOT RUB THE SURFACE WHEN YOU REMOVE THE ASH FROM THE_______
R AIRCRAFT. IF YOU RUB THE SURFACE, YOU CAN CAUSE
R EROSION/ABRASION.
R CAUTION : DO NOT USE FLUIDS TO REMOVE THE ASH. IF THERE IS A LAYER OF ASH_______
R ON THE AIRCRAFT SURFACES, REMOVE THE ASH WITH A VACUUM CLEANER
R (OR, IF YOU CANNOT USE A VACUUM CLEANER, USE AN AIR BLOWER, A
R SOFT CLOTH OR A HAND BRUSH). FLUIDS CAN MIX WITH THE ASH AND
R MAKE A PASTE THAT CAN CAUSE EROSION/ABRASION. THIS PASTE CAN GO
R INTO AREAS THAT ARE NOT EASY TO CLEAN.
R (1) If there is a layer of ash on the aircraft surfaces, remove the ash
R with a vacuum cleaner, an air blower, a soft cloth or a soft brush.
R (2) Clean the aircraft internally.
R (3) Clean the aircraft externally (Ref. TASK 12-21-11-615-001).
R Subtask 05-51-25-210-076
R B. Internal Inspection
R (Ref. TASK 35-12-41-100-001)
R -------------------------------------------------------------------------------R |ITEM|INSP| INSPECTION TASKS |PHASE|PHASE|PHASE|INSP|REF.|
R | |CODE| | 1 | 2 | 3 |SIGN|FIG.|
R |----|----|---------------------------------------|-----|-----|-----|----|----|
R |1. | |Inspection of the cabin area | | | | | |
R | | | | | | | | |
R | A.| |Examine the cabin area for ash | X | | | | |
R | | |contamination. | | | | | |
R | | |If you find contamination: | | | | | |
R | | |(1) Clean all the contaminated surfaces| | X | | | |
R | | | | | | | | |
R | B.| |Examine the cockpit for ash | X | | | | |
R | | |contamination. | | | | | |
R | | |If you find contamination: | | | | | |
R | | |(1) Clean all the contaminated surfaces| | X | | | |
R | | |(2) Examine the oxygen full face | | X | | | |
R | | | masks for contamination. | | | | | |
R | | | If you find contamination : | | | | | |
R | | | (a) Clean the oxygen full face | | | X | | |
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 时间限制/维护检查 2(104)