(a)
Make sure that the stabilizer does not move.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-10
ALL ú ú 02.1 Page 414 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 864-044
(6) Release the control wheel switches and then release the BRAKE BYPASS
valve button.
S 864-045
(7) Use the control wheel switches to move the stabilizer through its
full travel range.
(a) Make sure the stabilizer moves smoothly and freely through its
full travel.
(b) Make sure that the anti-rotation cables stay loose through the
full stabilizer travel.
(c) Make sure there are no leaks or damage in the hydraulic line
connections.
S 714-052
(8) AIRPLANES WITH STAB TRIM LEVERS ON THE CONTROL STAND;
do the Manual Operation and Mechanical Travel Limits Test
ú (AMM 27-41-00/501).
S 714-053
(9) AIRPLANES WITH ALTERNATE STAB TRIM SWITCHES ON THE CONTROL STAND;
do the Alternate-Electric Operation and Travel Limits Test
ú (AMM 27-41-00/501).
H. Put the Airplane Back to Its Usual Condition
S 414-047
(1) Close the access door for the forward stabilizer compartment, 311AL
ú (AMM 06-42-00/201).
ú
ú S 864-048
ú (2) Remove the power from the hydraulic systems (AMM 29-11-00/201).
ú
ú S 864-049
ú (3) Remove electrical power, if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-10
ALL ú ú 02.1 Page 415 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
1.
2.
ú ú ú
ú ú ú
ú
757 MAINTENANCE MANUAL
STABILIZER TRIM DRIVE HYDRAULIC MOTOR - REMOVAL/INSTALLATION
____________________________________________________________
General
_______
A. This procedure contains steps to remove and install the hydraulic motor on the stabilizer ballscrew actuator.
TASK 27-41-11-024-001Remove the Hydraulic Motor
__________________________
A. References
(1)
AMM 06-42-00/201, Empennage Access Doors and Panels
(2)
AMM 24-22-00/201, Electrical Power - Control
(3)
AMM 29-11-00/201, Main (Left, Right, and Center) Hydraulic Systems
B.
Access
(1)
Location Zones
211/212 Control Cabin
311/312 Area Aft of Pressure Bulkhead to BS 1787.45
(2)
Access Panel
311AL Forward Stabilizer Compartment
C.
Prepare for the Removal
S 864-002
(1)
Supply electrical power (AMM 24-22-00/201).
S 864-003
(2)
Remove the pressure from the right and center hydraulic systems andreservoirs (AMM 29-11-00/201).
S 864-004
(3)
Put the RIGHT and CENTER STAB TRIM SHUTOFF valve switches on the control stand panel, P10, to the CUTOUT position.
S 864-005
(4)
Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags:
(a)
11B19, STAB TRIM ALT (IF INSTALLED)
(b)
11C12, STAB TRIM SHUTOFF LEFT
(c)
11C13, STAB TRIM SHUTOFF RIGHT
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-41-11
ALL ú ú 02.1 Page 401 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(73)
