(e)
Signals to other aircraft systems.
(5)
FSEU-3 performs alternate flap and slat drive control. Specific functions are:
(a)
Alternate electric drive motor control.
(b)
Signals to other aircraft systems.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 06 Page 25 ú Sep 20/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
E5 EQUIPMENT RACK E5-1
SEE A
M10331 FSEU-1,
SEE B
FORWARD CARGO DOOR BSEE M10333 FSEU-3,
M10332 FSEU-2,
SEE B
(AFT VIEW) E5 EQUIPMENT RACK E5-3 E5-2 OUTBD
A
FSEU BIT INSTRUCTIONS
G G G
321 ACTIVE CHANNEL FSEU FSEU FLAP SLAT FSEU LINK DATA DATA LINK DATA LINK SLAT AUTOAUTO SLAT LEFT LEFT FLAPFLAP RIGHT RIGHT FLAPFLAP LEFT LEFT SLATSLAT RIGHT RIGHT SLATSLAT FLAP LVR A A A A A A A A TEST BIT TEST G COMPLETE
NAMEPLATE
FSEU (EXAMPLE)
B 1
Flap/Slat Electronic Unit Figure 13 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 01 Page 26 ú Dec 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
Flap/Slat Electonic Unit
Figure 13 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 03 Page 27 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
Flap/Slat Electronics Unit Block Diagram
Figure 14 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 04 Page 28 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 03 Page 29 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
Flap/Slat Electronics Unit Block Diagram
Figure 14 (Sheet 3)
A
757
MAINTENANCE MANUAL
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-51-00
ALL ú ú 04 Page 30 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(6)
Built in Test Equipment (BITE)
(a)
The FSEU BITE system electrically tests the FSEU and interfacing electronic components. BITE software is designed to isolate faults in the electronic system down to the line replaceable unit level.
(b)
The BITE test is activated by pressing a switch on the front of each FSEU box. The BITE test is self terminating and the results of the test are shown on the FSEU front panel.
(c)
Activation of BITE test causes TRAILING EDGE and LEADING EDGE lights to illuminate and EICAS messages to print on EICAS display successively per following table as a check of the availability of the lights and the EICAS messages.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(116)
