• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-21 08:08来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 S 865-C10
 (8)  
Put the CENTER STAB TRIM SHUTOFF switch on the P10 panel to NORM.

 S 865-C11

 (9)  
Move the captain's stabilizer-trim control-wheel-switches down (airplane nose up).

 (a)  
Make sure that the stabilizer moves.


 S 865-C12
 (10)
 Let the stabilizer move until it stops.

 S 865-C13

 (11)
 Release the stabilizer-trim control-wheel-switches.

 S 865-C14

 (12)
 Put the CENTER STAB TRIM SHUTOFF switch on the P10 panel to CUTOUT.

 S 215-C15

 (13)
 Make sure that dimension B on the stabilizer jackscrew is 0.80 to 1.40 inches (20-35 mm).

 S 215-C16

 (14)
 Extend the trailing edge flaps to the 15 unit position (Ref 27-51-00/201).


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-00
 ALL  ú ú 02 Page 529 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 S 865-C17
 (15)
 Do the deactivation procedure for the trailing edge flap system (Ref 27-51-00/201).

 S 865-C18

 (16)
 Put the CENTER STAB TRIM SHUTOFF switch on the P10 panel to NORM.

 S 865-C19

 (17)
 Move the captain's stabilizer-trim control-wheel-switches up (airplane nose down).

 (a)
Make sure that the stabilizer moves.


 S 865-C20
 (18)
 Let the stabilizer move until it stops then release the stabilizer-trim control-wheel-switches.

 S 865-C21

 (19)
 Put the CENTER STAB TRIM SHUTOFF switch on the P10 panel to CUTOUT.

 S 215-C22

 (20)
 Make sure that dimension B on the stabilizer jackscrew is 24.86 to 25.46 inches (631.4-646.6 mm) (Fig. 502).

 S 865-C23

 (21)
 Put the RIGHT STAB TRIM SHUTOFF switch on P10 to NORM.

 S 865-C24

 (22)
 Move the captain's stabilizer-trim control-wheel-switches down (airplane nose up).

 (a)
Make sure the stabilizer moves.


 S 865-C25
 (23)
 Let the stabilizer move until it stops.

 S 865-C26

 (24)
 Release the stabilizer-trim control-wheel-switches.

 S 865-C27

 (25)
 Put the RIGHT STAB TRIM SHUTOFF switch on the P10 panel to CUTOUT.

 S 215-C28

 (26)
 Make sure that dimension B on the stabilizer jackscrew is 0.80 to 1.40 inches.

 (27)
 Put the RIGHT STAB TRIM SHUTOFF switch on the P10 panel to NORM.


 S 865-C29
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-00
 ALL  ú ú 02 Page 530 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

 S 865-C30
 (28)
 Move the captain's stabilizer-trim control-wheel-switches up (airplane nose down).

 (a)
Make sure that the stabilizer moves.


 S 865-C31
 (29)
 Let the stabilizer move until it stops.

 S 865-C32

 (30)
 Release the stabilizer-trim control-wheel-switches.

 S 865-C33

 (31)
 Put the RIGHT STAB TRIM SHUTOFF switch on the P10 panel to CUTOUT.

 S 215-C34

 (32)
 Make sure that dimension B on the stabilizer jackscrew is 24.86 to 25.46 inches (631.4-646.6 mm).

 S 865-C35

 (33)
 Move the flaps to the fully retracted position (Ref 27-51-00/201).

 S 865-C36

 (34)
 Put the RIGHT STAB TRIM SHUTOFF switch on the P10 panel to NORM.

 S 865-C37

 (35)
 Move the captain's stabilizer-trim control-wheel-switches down (airplane nose up).

 (a)
Make sure the stabilizer moves.


 S 865-C38
 (36)
 Let the stabilizer move until it reaches 6.0 units of trim, as shown on the control stand stabilizer-position-indicators.

 S 865-C39
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 4(16)