- Do a check to make sure that there are no impacts on the fuselage around the AOA sensors, the static probes and the ADMs (Ref. SRM 530011P.BLOCK101).
B. If the test shows a different altitude value from the ADR3 (compared to the ADR1 and the ADR2):
- do a visual check of the static probes.
(1) If one static probe is damaged, replace it (Ref. AMM TASK 34-11-16-000-001) and (Ref. AMM TASK 34-11-16-400-002).
(2) Make sure that the small wing of the AOA3 sensor is not damaged and that the mechanism moves freely.
(a) If the AOA sensor 3 is damaged, replace it (Ref. AMM TASK 34-11-19-000-001) and (Ref. AMM TASK 34-11-19-400-001).
(3) Do the draining and flushing of the standby static and the standby total pressure line of the Air Data Module (19FP8) (Ref. AMM TASK 34-10-00-170-003).
(4) Do the leak test of the standby circuits (Ref. AMM TASK 34-21-00-790-001).
(5) Do the functional test of the ADM for the standby circuit (Ref. AMM TASK 34-11-00-720-001).
(a) If one pressure value is different, replace the defective ADM (Ref. AMM TASK 34-11-17-000-001) and (Ref. AMM TASK 34-11-17-400-001).
(b) If the pressure values are the same, replace the AOA sensor 3 (3FP3) (Ref. AMM TASK 34-11-19-000-001) and (Ref. AMM TASK 34-11-19-400-001).
(6) If the fault continues:
- Do a check to make sure that there are no impacts on the fuselage around the AOA sensor 3, the ADMs and the static probes (Ref. SRM 530011P.BLOCK101).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 051-099, 106-149, 204-299, 301-399, ∞∞34-13-00∞∞∞∞∞∞∞∞∞∞Page B243
401-499, Aug 01/05 CES
C. If the test shows a different airspeed value from the ADR1 (compared to the ADR2 and the ADR3), from the ADR2 (compared to the ADR1 and the ADR3) or from the ADR3 (compared to the ADR1 and the ADR2):
(1) Do the Operational Test of the probe ice protection (Ref. AMM TASK 30-31-00-710-001).
(a) If the test gives a maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
(2) Do the Interface test of the ADR (Ref. AMM TASK 34-13-00-740-002).
(a) If the test gives a maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
(3) do a visual check of the pitot probes. R - If one pitot probe is damaged, replace it (Ref. AMM TASK 34-11-15-R 000-001) and (Ref. AMM TASK 34-11-15-400-001).
(4) Do the flushing of the total pressure line of the ADM (19FP1, 19FP2, 19FP3) (Ref. AMM TASK 34-10-00-170-001).
(5) Do the leak test of the main Air Data system (Ref. AMM TASK 34-13-00-790-002).
(6) Do the functional test of the ADM for the CAPT (F/O) circuit (Ref. AMM TASK 34-11-00-720-001).
R (a) If one pressure value is different, replace the defective ADM
R (Ref. AMM TASK 34-11-17-000-001) and (Ref. AMM TASK 34-11-17-400-001).
(7) If the fault continues:
- If there is a report of small airspeed/altitude fluctuations and if there are maintenance messages related to the SFCCs in the PFR : replace the SFCCs.
- Do a check of the ADR/SFCC interface wirings (Ref. ASM 34-13/02).
- Do a check to make sure that there are no impacts on the fuselage around the ADMs and the static probes (Ref. SRM 530011P.BLOCK101).
D. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-13-00∞∞∞∞∞∞∞∞∞∞Page B244
May 01/05 CES
R **ON A/C 001-049, 101-105, 151-199, 201-228,
R Post SB 34-1222 For A/C 001-049,101-105,151-199,201-228,
TASK 34-13-00-810-998-A
Altitude or Airspeed Discrepancy between CAPT PFD and F/O PFD (A/C with R.V.S.M. capability on three ADIRUs)
1. Possible Causes_______________
R R R R R - static probe - AOA sensor - AOA sensor 3 - pitot probe - SFCCs
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R R AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM AMM 24-51-34-000-001 27-51-34-400-001 30-31-00-710-001 34-10-00-170-001 34-10-00-170-002 34-10-00-170-003 34-11-00-720-001 34-11-15-000-001 34-11-15-400-001 34-11-16-000-001 34-11-16-400-002 34-11-17-000-001 34-11-17-400-001 34-11-19-000-001 34-11-19-400-001 34-13-00-720-009 34-13-00-740-002 34-13-00-740-003 34-13-00-790-002 34-21-00-790-001 Installation of the SFCC (21CV,22CV)Operational Test of the Probe Ice ProtectionFlushing of the Principal Total Pressure LinesFlushing of the Principal Static Pressure LinesDraining and Flushing of Standby Pneumatic CircuitsFunctional Test of the ADMRemoval of the Pitot Probe (9DA1, 9DA2, 9DA3)Installation of the Pitot Probe (9DA1, 9DA2, 9DA3)Removal of the Static Probe (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3)Installation of the Static Probe (7DA1,7DA2,7DA3,8DA1,8DA2,8DA3)Removal of the Air Data Module (19FP1,19FP2,19FP3,19FP4,19FP5,19FP6, 19FP7,19FP8)Installation of the Air Data Module (19FP1,19FP2,19FP3,19FP4,19FP5,19FP6, 19FP7,19FP8)Removal of the Angle of Attack Sensor (3FP1, 3FP2, 3FP3)Installation of the Angle of Attack Sensor (3FP1, 3FP2, 3FP3)Functional Test of the Altitude and Airspeed DataINTERFACE TEST of the ADRSYSTEM TEST of the ADRLeak Test of the Principal Static and Total Air Data SystemLow range leak test of standby pneumatic circuits
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 2(9)
