- do the BITE test of the MMR2 (Ref. AMM TASK 34-36-00-740-003).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page A218
May 01/05 CES
(1) If the test gives the maintenance message
FMGC1(1CA1) BUS ILS/MMR2(40RT2):
- replace the MMR that you installed on the side 2.
(2) If the fault continues:
- replace the FMGC-2 (1CA2) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FMGC2 to the MMR1 from pins AB/10A, 10B to pins AB/1J, 1K (Ref. ASM 34-36/01).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page A219
May 01/05R
CES
TASK 34-36-00-810-861
Loss of the MMR2 BUS ILS from the FMGC1
1. Possible Causes
_______________
- MMR-2 (40RT2)
- FMGC-1 (1CA1)
- wiring from the FMGC1 to the MMR2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-36-00-740-003 BITE Test of the MMR
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
40RT2)
ASM 34-36/01
3. Fault Confirmation
__________________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
A. Test Do the BITE test of the MMR2 (Ref. AMM TASK 34-36-00-740-003).
**ON A/C ALL
4. Fault Isolation
_______________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
A. If the test gives the maintenance message
FMGC1(1CA1) BUS ILS/MMR2(40RT2):
- swap the MMR-2 (40RT2) and the MMR-1 (40RT) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
- do the BITE test of the MMR1 (Ref. AMM TASK 34-36-00-740-003).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page A220
May 01/05 CES
(1) If the test gives the maintenance message
FMGC2(1CA2) BUS ILS/MMR1(40RT1):
- replace the MMR that you installed on the side 1.
(2) If the fault continues:
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FMGC1 to the MMR2 from pins AB/10A, 10B to pins AB/1J, 1K (Ref. ASM 34-36/01).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞34-36-00∞∞∞∞∞∞∞∞∞∞Page A221
May 01/05R
CES TASK 34-36-00-810-862
Loss of the MMR1 BUS GPS from the FMGC1
1. Possible Causes
_______________
- MMR-1 (40RT1)
- FMGC-1 (1CA1)
- wiring from the FMGC1 to the MMR1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-36-00-740-003 BITE Test of the MMR
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
40RT2)
ASM 34-36/02
3. Fault Confirmation
__________________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
R Post SB 34-1186 For A/C 001-049,101-101,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 2(135)
