4. Fault Isolation
_______________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
R Post SB 34-1186 For A/C 001-049,101-101,
A. If the test gives the maintenance message
FMGC1(1CA1) BUS GPS/MMR1(40RT1):
- swap the MMR-1 (40RT1) and the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
- do the BITE test of the MMR2 (Ref. AMM TASK 34-36-00-740-003).
(1) If the test gives the maintenance message
FMGC2(1CA2) BUS GPS/MMR2(40RT2):
- replace the MMR that you installed on the side 2.
(2) If the fault continues:
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FMGC1 to the MMR1 from pins AB/11A, 11B to pins AB/8C, 8D (Ref. ASM 34-36/02).
B. Do the test given in para. 3.
TASK 34-36-00-810-863
Loss of the MMR2 BUS GPS from the FMGC1
1. Possible Causes
_______________
- MMR-2 (40RT2)
- FMGC-1 (1CA1)
- wiring from the FMGC1 to the MMR2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-36-00-740-003 BITE Test of the MMR
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
40RT2)
ASM 34-36/02
3. Fault Confirmation
__________________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
R Post SB 34-1186 For A/C 001-049,101-101,
A. Test Do the BITE test of the MMR2 (Ref. AMM TASK 34-36-00-740-003).
4. Fault Isolation
_______________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
R Post SB 34-1186 For A/C 001-049,101-101,
A. If the test gives the maintenance message
FMGC1(1CA1) BUS GPS/MMR2(40RT2):
- swap the MMR-2 (40RT2) and the MMR-1 (40RT1) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
- do the BITE test of the MMR1 (Ref. AMM TASK 34-36-00-740-003).
(1) If the test gives the maintenance message
FMGC2(1CA2) BUS GPS/MMR1(40RT1):
- replace the MMR that you installed on the side 1.
(2) If the fault continues:
- replace the FMGC-1 (1CA1) (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(a) If the fault continues:
- do a check and repair the wiring from the FMGC1 to the MMR2 from pins AB/10A, 10B to pins AB/8J, 8K (Ref. ASM 34-36/02).
B. Do the test given in para. 3.
TASK 34-36-00-810-864
Loss of the MMR1 BUS GPS from the FMGC2
1. Possible Causes
_______________
- MMR-1 (40RT1)
- FMGC-2 (1CA2)
- wiring from the FMGC2 to the MMR1
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 34-36-00-740-003 BITE Test of the MMR
AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,
40RT2)
ASM 34-36/02
3. Fault Confirmation
__________________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
R Post SB 34-1186 For A/C 001-049,101-101,
A. Test Do the BITE test of the MMR1 (Ref. AMM TASK 34-36-00-740-003).
4. Fault Isolation
_______________
**ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060, Post SB 34-1184 For A/C 001-004,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 2(136)
