3. Fault Confirmation
__________________
A. Test Do the Interface test of the ADR (system 1) (Ref. AMM TASK 34-13-00-740-002).
4. Fault Isolation
_______________
A. If the test gives the maintenance message WRG:AOA AVERAGE-UNIQUE PIN PROG:
- remove the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001)
- do a check of pin AA/5G on the rack connector
- compare the state of the pin with the AOA UNIQUE pin programming given in the ASM (Ref. ASM 34-12/01).
(1) If the pin programming is correct:
- install a new ADIRU1 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin programming is incorrect:
- repair the wiring AOA UNIQUE pin programming of the ADIRU1: pin AA/5G.
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 151-199, 201-210, ∞∞34-13-00∞∞∞∞∞∞∞∞∞∞Page B235
301-399, 401-499, Aug 01/05 CES Failure of the ADR2 AOA Average-Unique Pin-Programming
1. Possible Causes
_______________
- ADIRU-2 (1FP2)
- wiring AOA UNIQUE pin programming of the ADIRU2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-13-00-740-002 INTERFACE TEST of the ADR
ASM 34-12/02
3. Fault Confirmation
__________________
A. Test Do the Interface test of the ADR (system 2) (Ref. AMM TASK 34-13-00-740-002).
4. Fault Isolation
_______________
A. If the test gives the maintenance message WRG:AOA AVERAGE-UNIQUE PIN PROG:
- remove the ADIRU-2 (1FP2) (Ref. AMM TASK 34-12-34-000-001)
- do a check of pin AA/5G on the rack connector
- compare the state of the pin with the AOA UNIQUE pin programming given in the ASM (Ref. ASM 34-12/02).
(1) If the pin programming is correct:
- install a new ADIRU2 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin programming is incorrect:
- repair the wiring AOA UNIQUE pin programming of the ADIRU2: pin AA/5G.
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 151-199, 201-210, ∞∞34-13-00∞∞∞∞∞∞∞∞∞∞Page B236
301-399, 401-499, Aug 01/05 CES Failure of the ADR3 AOA Average-Unique Pin-Programming
1. Possible Causes
_______________
- ADIRU-3 (1FP3)
- wiring AOA UNIQUE pin programming of the ADIRU3
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
AMM 34-13-00-740-002 INTERFACE TEST of the ADR
ASM 34-12/03
3. Fault Confirmation
__________________
A. Test Do the Interface test of the ADR (system 3) (Ref. AMM TASK 34-13-00-740-002).
4. Fault Isolation
_______________
A. If the test gives the maintenance message WRG:AOA AVERAGE-UNIQUE PIN PROG:
- remove the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001)
- do a check of pin AA/5G on the rack connector
- compare the state of the pin with the AOA UNIQUE pin programming given in the ASM (Ref. ASM 34-12/03).
(1) If the pin programming is correct:
- install a new ADIRU3 (Ref. AMM TASK 34-12-34-400-001).
(2) If the pin programming is incorrect:
- repair the wiring AOA UNIQUE pin programming of the ADIRU3: pin AA/5G.
B. Do the test given in Para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 101-105, 151-199, 201-210, ∞∞34-13-00∞∞∞∞∞∞∞∞∞∞Page B237
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 2(6)
