• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-28 22:55来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 3. Fault Confirmation
__________________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
 A. Test Do the BITE test of the MMR2 (Ref. AMM TASK 34-36-00-740-003).


 4. Fault Isolation
_______________
 **ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
 A. If the test gives the maintenance message ADIRU1(1FP1)/MMR2(40RT2):
 - swap the ADIRU-1 (1FP1) and the ADIRU-3 (1FP3) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
 (1) If the test gives the maintenance message ADIRU3(1FP3)/MMR2(40RT2):

 - replace the ADIRU that you installed on side 3.

 (2) If the fault continues:

 - swap the MMR-2 (40RT2) and the MMR-1 (40RT1) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).

 - do the BITE test of the MMR1 (Ref. AMM TASK 34-36-00-740-003).


 (a) If the test gives the maintenance message ADIRU2(1FP2)/MMR1(40RT1):

 - replace the MMR that you installed on side 1.

 (b) If the fault continues:

 


 - do a check and repair the wiring between the ADIRU1 and the MMR2 for pins AB/10C, 11C and AB/4E, 4F (Ref. ASM 34-36/02).
 B. Do the test given in para. 3.


 TASK 34-36-00-810-858
 Loss of the ADIRU2 Data on the MMR2

 1. Possible Causes
_______________
 - ADIRU-2 (1FP2)

 - MMR-1 (40RT1)

 - wiring between the ADIRU2 and the MMR2


 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 34-12-34-000-001 Removal of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-12-34-400-001 Installation of the ADIRU (1FP1, 1FP2, 1FP3)
 AMM 34-36-00-740-003 BITE Test of the MMR
 AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
 AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,

 40RT2)
 ASM 34-36/02

 3. Fault Confirmation
__________________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
 A. Test Do the BITE test of the MMR (system 1 and 2) (Ref. AMM TASK 34-36-00-740-003).


 4. Fault Isolation
_______________
 **ON A/C ALL
R Post SB 34-1147 For A/C 001-004,051-060,
 A. If the test gives the maintenance message ADIRU2(1FP2)/MMR2(40RT2):
 - swap the ADIRU-2 (1FP2) and the ADIRU-1 (1FP1) (Ref. AMM TASK 34-12-34-000-001) and (Ref. AMM TASK 34-12-34-400-001).
 (1) If the test gives the maintenance message ADIRU1(1FP1)/MMR1(40RT1):

 - replace the ADIRU that you installed on side 1.

 (2) If the fault continues:


 - swap the MMR-1 (40RT1) and the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
 (a) If the test gives the maintenance message ADIRU1(1FP1)/MMR1(40RT1):

 - replace the MMR that you installed on side 1.

 (b) If the fault continues:


 - do a check and repair the wiring between the ADIRU2 and the MMR2 for pins AB/5E, 6E and AB/8A, 8B (Ref. ASM 34-36/02).
 B. Do the test given in para. 3.


 TASK 34-36-00-810-860
 Loss of the MMR1 BUS ILS from the FMGC2

 1. Possible Causes
_______________
 - MMR-1 (40RT1)

 - FMGC-2 (1CA2)

 - wiring from the FMGC2 to the MMR1


 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
 AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
 AMM 34-36-00-740-003 BITE Test of the MMR
 AMM 34-36-31-000-002 Removal of the Multi Mode Receiver (40RT1, 40RT2)
 AMM 34-36-31-400-002 Installation of the Multi Mode Receiver (40RT1,

 40RT2)
 ASM 34-36/01

 3. Fault Confirmation
__________________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
 A. Test Do the BITE test of the MMR1 (Ref. AMM TASK 34-36-00-740-003).
 **ON A/C ALL
 4. Fault Isolation
_______________ **ON A/C ALL R Post SB 34-1147 For A/C 001-004,051-060,
 A. If the test gives the maintenance message
 FMGC2(1CA2) BUS ILS/MMR1(40RT1):

 - swap the MMR-1 (40RT1) and the MMR-2 (40RT2) (Ref. AMM TASK 34-36-31-000-002) and (Ref. AMM TASK 34-36-31-400-002).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 导航 NAVIGATION 2(134)