(l)
Remove and discard the seal (38).
(m)
Hold the duct (52) and remove the clamp (53) and then the duct (52).
(5)
To remove the duct (94): (Ref. Fig. 403/TASK 30-11-42-991-003)
(a)
Remove and discard the braided wires from the insulation muffs
(93) and (99) and then remove the insulation muffs (93) and (99).
(b)
Remove the nut (100), the screw (95) and the washer (101) to disconnect the ends of the bonding straps (96) and (97).
(c)
Hold the duct (94) and remove the clamp (53).
(d)
Turn the duct (94) axially in relation to the duct (52) and carefully remove it from the duct box (104).
(e)
Remove and discard the seal (98).
(6)
To remove the duct box (104). (Ref. Fig. 403/TASK 30-11-42-991-003)
(a)
Remove the duct (94) as given before.
(b)
Remove the telescopic duct (Ref. TASK 30-11-41-000-001).
(c)
Remove the nut (107), the screw (110), the washer (108) and the bonding strap (109).
(d)
Remove and discard the lockwire from the bolts (102) and (106).
(e)
Hold the duct box (104) and remove the bolts (102) and (106) and the washers (103) and (105.
(f)
Remove the duct box (104).
Anti-ice Duct - Ribs 9, 10 and 11
Figure 401/TASK 30-11-42-991-001
1EFF : ALL 1 30-11-42 Page 404
1 1 Feb 01/98
1 1
1CES 1
Anti-ice Duct - Ribs 9, 10 and 11
Figure 402/TASK 30-11-42-991-002
1EFF : ALL 1 30-11-42 Page 405
1 1 Feb 01/98
1 1
1CES 1
Anti-Ice Duct - Ribs 11, 12 and 13
Figure 403/TASK 30-11-42-991-003
1EFF : ALL 1 30-11-42 Page 408
1 1 Feb 01/98
1 1
1CES 1
TASK 30-11-42-400-001
Installation of the Anti-Ice Duct
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific safety barriers
No specific warning notices
No specific access platform 3.5 m (11 ft. 6 in.)
R No specific Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 16-016 C Z-12.383
EXTERNAL DECORATION PAINT (Ref. 20-31-00)
Material No. 19-001 OTH 16/2/38 SWG
WIRE,SS,BRAIDED (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
R R R
R C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
2 seal 30-11-05 07 -210
2 seal 30-11-05 07A-210
36 seal 30-11-05 07 -060
36 seal 30-11-05 07A-060
38 seal 30-11-05 07 -060
38 seal 30-11-05 07A-060
98 seal 30-11-05 05A-100
D. Referenced Information
------------------REFERENCE -------------------------------DESIGNATION ------------------------------
-------------------------------------------------------------------------------
20-28-00-912-004 Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM ICE AND RAIN PROTECTION 防冰和排雨1(43)
