-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-076) or
-BONDING AND ADHESIVE COMPOUNDS (Material No. 08-077) |------------------------------------|---------------------------------------| | Mat.-No.: | Damage length: | Damage width: | |------------------------------------|---------------------------------------| |08-075(Akro Fireguard Patch, small) | 50.8 mm (2.0 in.) | 50.8 mm (2.0 in.) | |------------------------------------|---------------------------------------| |08-076(Akro Fireguard Patch, medium)| 50.8 mm (2.0 in.) | 152 mm (6.0 in.) | |------------------------------------|---------------------------------------| |08-077(Akro Fireguard Patch, large) | 152 mm (6.0 in.) | 152 mm (6.0 in.) | |------------------------------------|---------------------------------------|
NOTE : The repair patch must overlap the damaged area 25.4 mm (1.00
____
in.) minimum in all directions
Subtask 25-00-00-340-089
B. Repair of Cargo Compartment Lining(s) with Patches and Filler
(Ref. Fig. 828/TASK 25-00-00-991-040)
NOTE : It is not allowed to overlap patches
____
(1)
Carefully remove the damaged material from the lining panel.
(2)
If necessary remove a portion of the layers of TELDAR film from the repair area at least as large as the used patches.
NOTE : The lining panel has a TELDAR film if the resin below the
____
white film is of a different color.
EFF : ALL 25-00-00Page A845
Aug 01/05
R
CES
CC Honeycomb Linings, Filler and Patches (AKRO 300) - Damage Through Figure 828/TASK 25-00-00-991-040
EFF : ALL 25-00-00Page A846 Aug 01/05 R CES
(3)
Smooth the repair area with emery cloth, grade 80-120 and make sure that all the gloss finish is removed.
(4)
Remove the grit and dust from the repair area with the towel supplied in the repair kit(s).
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE
_______ THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(5)
Clean the repair area with CLEANING AGENTS (Material No. 11-010) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003).
(6)
Install the repair patch
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-075)
or
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-076)
or
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-077).
(a)
Install the repair patch on one side of the damaged panel.
(b)
Perform the further work-steps necessary to complete the repair according to the manufacturer's instructions delivered with the repair kit.
(c)
Make sure that:
-
the repair patch overlap the damaged area 25.4 mm (1.00 in.) minimum in all directions
-
the reinforcement scrim overlap the repair patch 25.4 mm (1.00 in.) minimum in all directions.
EFF : ALL 25-00-00Page A847
Aug 01/05
R
CES (d) Fill the
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115) or
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115A) or
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115B) or
-
BONDING AND ADHESIVE COMPOUNDS (Material No. 08-115C) into the prepared area.
NOTE : Obey the manufacturer's instructions.
____
(e)
Install the repair patch on the other side of the damaged panel.
(f)
Perform the further work-steps necessary to complete the repair according to the manufacturer's instructions delivered with the repair kit.
(g)
Make sure that:
-
the repair patch overlap the damaged area 25.4 mm (1.00 in.) minimum in all directions
-
the reinforcement scrim overlap the repair patch 25.4 mm (1.00 in.) minimum in all directions.
5. Close-up
________
Subtask 25-00-00-410-086
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备1(81)
