-
the shoulder part must move freely onto the inertia rail.
-you must hear a clicking sound.
(Ref. Fig. 404/TASK 25-22-41-991-004)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. In the cabin at the related cabin In the cabin at the given cabin
attendant seat: attendant seat:
-pull the shoulder part of the - the retainer must lock the restraint restraint system. system.
R - put the fastener into the - you must hear a clicking sound. R buckle.
EFF : ALL
25-22-41Page 417
Feb 01/00
5. Close-up
________ Subtask 25-22-41-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
Subtask 25-22-41-862-051
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-22-41Page 418
SEAT - CABIN ATTENDANT FREE STANDING - REMOVAL/INSTALLATION
___________________________________________________________
TASK 25-22-42-000-001
Removal of the Free-Standing Cabin-Attendant Seat(s)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
R No specific 1 SCRAPER - NON METALLIC
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
Power
25-27-15-000-001 Removal of an Emergency Equipment Stowage
25-22-42-991-001 Fig. 401
3. Job Set-up
__________
Subtask 25-22-42-861-050
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
Subtask 25-22-42-010-050
B. Get Access
(1)
Remove all of the equipment from the stowage compartment of the seat.
(2)
Remove the stowage compartment of the emergency equipment (Ref. TASK 25-27-15-000-001).
EFF : ALL
25-22-42Page 401
4. Procedure
_________
Subtask 25-22-42-020-050
A. Remove the Seat Assembly
(Ref. Fig. 401/TASK 25-22-42-991-001)
(1)
Pull the end of the synthetic cord to loosen the sealant.
(2)
Open the access flap of the seat assembly (4)
(3)
Remove the bolts (1) and the washers (2) and the seat assembly (4).
(4)
Remove and discard the packings (3).
(5) If necessary remove the busches (5). R (6) Remove the old sealant with a SCRAPER - NON METALLIC.
EFF : ALL
25-22-42Page 402
R Free-Standing Cabin-Attendant Seat Figure 401/TASK 25-22-42-991-001
EFF : ALL 25-22-42 Page 403 Feb 01/02
CES
TASK 25-22-42-400-001
Installation of the Free-Standing Cabin-Attendant Seat(s)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备1(154)
