5. Close-up
________ Subtask 25-00-00-862-083
A. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
EFF : ALL
25-00-00Page 855
Aug 01/05
R
CES EFF : ALL
TASK 25-00-00-340-011
R Repair of an Overhead Stowage Compartment
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R R R -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R No specific No specific 1 SPATULA - NON METALLIC 1 SPATULA - PLASTIC
R B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R No specific No specific Material No. 05-110 emery cloth 320-400 grade emery cloth, 200-300 grade USA BMS 8-223
R Material No. 08-004 LAMINATE,CARGO LINER (Ref. 20-31-00)USA MIL-A-25457
R Material No. 08-017A ADHESIVE SEALANT (Ref. 20-31-00) USA DOD-A-82720
R R Material No. 08-074 ADHESIVE STRUCTURAL FLEXIBLE (Ref. 20-31-00)
R R Material No. 11-006 MASKING TAPE (Ref. 20-31-00) USA OM-232-GR-A AMS-3004 MIL-A-6090
R Material No. 11-010 METHYL ALCOHOL (Ref. 20-31-00)USA TT-I-735 GRADE A
R Material No. 16-045 ISOPROPYL ALCOHOL (Ref. 20-31-00)
R Material No. 19-003 SEALANT POREFILLER (Ref. 20-31-00)USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
25-00-00Page 856
Aug 01/05
R C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R 24-42-00-861-001 24-42-00-862-001 25-00-00-370-001 25-24-41-000-001 25-24-41-400-001 25-00-00-991-005 25-00-00-991-047 25-00-00-991-032 Energize the Ground Service Network from the External PowerDe-energize the Ground Service Network Supplied from the External Power Repair of Painted Components Removal of the Overhead Stowage Compartments Installation of the Overhead Stowage Compartments Fig. 804 Fig. 810 Fig. 811
3. Job Set-up__________
Subtask 25-00-00-861-069
A. Energize the ground service network (Ref. TASK 24-42-00-861-001).
4. Procedure_________
Subtask 25-00-00-340-067
R R A. Attachment of the Seal of the Overhead-Stowage-Compartment (Ref. Fig. 810/TASK 25-00-00-991-047)
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
EFF : ALL
25-00-00Page 857
Aug 01/05
R Seal - OHSC Figure 810/TASK 25-00-00-991-047
EFF : ALL 25-00-00 Page 858 Aug 01/05
CES
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(1)
Open the related door (1)
(2)
If necessary, remove the seal (2).
(3)
Clean the repair area and the seal with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) and CLEANING AGENTS (Material No. 11-010).
(4)
Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-004) to the bonding area.
NOTE : Refer to the manufacturers instruction for the correct
____
procedure.
(5)
Put the seal (2) in position and carefully push it on to the structure of the overhead-stowage-compartment.
(6)
Make sure that the work area is clean and clear of tool(s) and other items.
(7)
Close the door (1).
EFF : ALL
25-00-00Page 859
Aug 01/05
R
CES EFF : ALL
R Subtask 25-00-00-340-107
R B. Repair of the Bottom Panel of the Overhead Stowage Compartment(s)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备1(58)
