4. Procedure
_________ (Ref. Fig. 401/TASK 25-13-43-991-001) Subtask 25-13-43-420-050
A. Installation of the Fixed Window Roller-Blind
(1)
Put the roller-blind (5) in position.
(2)
Install the washer (4) and tighten the screws (3).
5. Close-up
________ Subtask 25-13-43-860-052
A. Put the aircraft back to its initial configuration.
(1)
Put the cover (1) in position and tighten the screws (2).
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
EFF : ALL
25-13-43Page 403
CARPET - COCKPIT - REMOVAL/INSTALLATION
_______________________________________
TASK 25-13-44-000-001
Removal of the Cockpit Textile Floor Covering (Carpet)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
Power 25-11-41-000-001 Removal of the Third Occupant Seat 25-11-42-000-001 Removal of the Fourth Occupant Seat (13MM) 25-11-51-000-001 Removal of the Captain/First Officer Seat (3MS, 4MS) 25-13-44-991-001 Fig. 401
3. Job Set-up
__________ Subtask 25-13-44-861-050
A. Energize the aircraft electrical circuits
(Ref. TASK 24-42-00-861-001).
4. Procedure
_________ (Ref. Fig. 401/TASK 25-13-44-991-001) Subtask 25-13-44-020-050
A. Removal of the Seats
(1)
Remove the Fourth Occupant seat (Ref. TASK 25-11-42-000-001).
(2)
Remove the Third Occupant seat (Ref. TASK 25-11-41-000-001).
(3)
Remove the Captain and the First Officer seats (Ref. TASK 25-11-51-000-001).
EFF : ALL
25-13-44Page 401
Textile Floor Covering
Figure 401/TASK 25-13-44-991-001
EFF : ALL 25-13-44 Page 402
Aug 01/05
CES
Subtask 25-13-44-020-051
B. Removal of the Textile Floor Covering
(1)
Remove the twelve screws (5).
(2)
Remove the grid (3).
(3)
Remove the cover strip (4).
(4)
Remove the floor covering (1):
(a)
Use a non-metallic scraper to release the carpet from the floor.
(b)
Remove the remaining double-sided adhesive tape (2) with the non-metallic scraper.
EFF : ALL
25-13-44Page 403
TASK 25-13-44-400-001
Installation of the Cockpit Textile Floor Covering (Carpet)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ROLLER - RUBBER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-065 USA MIL-T-60394 TYPE I CLASS I
DOUBLE SIDED ADHESIVE TAPE (Ref. 20-31-00) Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External
Power 25-11-41-000-001 Removal of the Third Occupant Seat 25-11-41-400-001 Installation of the Third Occupant Seat 25-11-42-000-001 Removal of the Fourth Occupant Seat (13MM) 25-11-42-400-001 Installation of the Fourth Occupant Seat (13MM) 25-11-51-000-001 Removal of the Captain/First Officer Seat (3MS, 4MS) 25-11-51-400-001 Installation of the Captain/First Officer Seat (3MS,
4MS) 25-13-44-991-001 Fig. 401
EFF : ALL
25-13-44Page 404
3. Job Set-up
__________ Subtask 25-13-44-860-050
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备1(130)
