A320飞机维护手册 AMM EQUIPMENT/FURNISHINGS 设备1(66)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

B. Get Access
(1) Remove the toilet shroud (Ref. TASK 25-45-22-000-001).
4. Procedure
_________
Subtask 25-00-00-340-074
A. Repair the Toilet Shroud
(Ref. Fig. 814/TASK 25-00-00-991-021)

WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(1)
Use a emery cloth, 320-400 grade to remove old bonding material from the toilet shroud (1) and the spacer (2).

(2)
Use the CLEANING AGENTS (Material No. 11-010) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) to clean the surfaces on the toilet shroud (1) and the spacer (2) to be bonded.

(3)
Apply the BONDING AND ADHESIVE COMPOUNDS (Material No. 08-051) to the surfaces on the spacer (2) to be bonded.

(4)
Put the spacer (2) in position on the toilet shroud (1).

NOTE : The bond between the joints will take approximately 2 hours to
____
dry.

R EFF : 004-049, 053-099, 101-149, 151-199, 25-00-00Page 884 201-299, 301-399, 401-499, Aug 01/05
CES

Toilet Shroud Figure 814/TASK 25-00-00-991-021
R EFF : 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499, 25-00-00 Page 885 Aug 01/05
CES

(5) Use the CLEANING AGENTS (Material No. 11-010) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) to remove unwanted bonding material.
Subtask 25-00-00-410-072
B. Close Access
(1) Install the toilet shroud (Ref. TASK 25-45-22-400-001).
5. Close-up
________ Subtask 25-00-00-942-077
A. Close-up
(1)
Make sure that the work area is clean and clear of tool(s) and other items.

(2)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.

Subtask 25-00-00-862-071
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).

R EFF : 004-049, 053-099, 101-149, 151-199, 25-00-00Page 886 201-299, 301-399, 401-499, Aug 01/05
CES **ON A/C ALL

TASK 25-00-00-340-014
Toilet Seat - Repair
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 WARNING NOTICE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific emery cloth, grade 320-400 No specific Buffer PN 11593 No specific Sicomet 85 Material No. 11-010 USA TT-I-735 GRADE A
ISOPROPYL ALCOHOL (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 25-00-00-991-022 Fig. 815
EFF : ALL