曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
(M/M/S)
MANUFACTURER
SERIAL NO.
APPLICABLE
CCAR
SPECIAL
OPERATION
REMARK
1. Issued by (Branch Name) ,Regional Administration of CAAC
2. These Operations Specifications are approved by direction of CAAC
Principal Maintenance Inspector: (Name & Signature of POI)
3. Date Approval is effective (Y/M/D) Amendment Number:
4. The certificate holder hereby accepts and receives the Operations Specifications in this
paragraph.
Certificate Holder Representative: (Name & Signature)
Position: Date(Y/M/D):
CIVIL AVIATION
ADMINISTRATION
OF CHINA CCAR-121 / 135 OPERATIONS SPECIFICATIONS
CAAC DOCUMENT
APPROVAL NO
AC-121-001R1
(Company Name) D0005-1 Certificate No:
Effective Date: Y M D
D0005 MAINTENANCE ENGINEERING MANAGEMENT MANUAL
a. The certificate holder is authorized to managing the maintenance of the aircraft in these
Operations Specifications according to the Maintenance Engineering Management Manual listed
hereunder, and the certificate holder shall carry out the manual in practical:
DOCUMENT NO. DOCUMENT NAME DOCUMENT DATE
b. The document listed above and any of its revisions only valid after being approved by
CAAC with Stamp and signature on its front cover as well as its List of Effective Pages.
c. Except for sub-paragraph “d”, the specific procedure referred within the document listed
above will be automatically granted acceptance by CAAC, and the certificate holder may
revise it in accordance with the defined procedures. These procedures should also be
carried out by the certificate holder in practical.
d. For the Special Procedure which required approval by CAAC, if not included in the
document listed in above table, it should obtain approval from CAAC separately before
validation.
e. CAAC keep the right of continue to assess and evaluate the document listed above
according to the regulations, as well as to the procedures referred within the document,
and require correcting any deficiencies. The certificate holder shall take proper
corrective action for the deficiencies in timely manner; otherwise, the above approval or
acceptance will result to terminate automatically.
f. The termination of the approval or acceptance to the document listed above or any of its
referred procedures will result to terminate the validation of Certificate Holder’s
operation specifications or impose additional restrictions as necessary.
CIVIL AVIATION
ADMINISTRATION
OF CHINA CCAR-121 / 135 OPERATIONS SPECIFICATIONS
CAAC DOCUMENT
APPROVAL NO
AC-121-001R1
(Company Name) D0005-2 Certificate No:
Effective Date: Y M D
1. Issued by (Branch Name) ,Regional Administration of CAAC
2. These Operations Specifications are approved by direction of CAAC
Principal Maintenance Inspector: (Name & Signature of POI)
3. Date Approval is effective (Y/M/D) Amendment Number:
4. The certificate holder hereby accepts and receives the Operations Specifications in this
paragraph.
Certificate Holder Representative: (Name & Signature)
Position: Date(Y/M/D):
CIVIL AVIATION
ADMINISTRATION
OF CHINA CCAR-121 / 135 OPERATIONS SPECIFICATIONS
CAAC DOCUMENT
APPROVAL NO
AC-121-001R1
(Company Name) D0007-1 Certificate No:
Effective Date: Y M D
D0007 TRAINING PROGRAM
a. The certificate holder is authorized to conduct personnel training and training management in its
maintenance system according to the Training Program listed hereunder, and it is the minimum
standards for the certificate holder to carry out training in practical:
DOCUMENT NO. DOCUMENT NAME DOCUMENT DATE
b. The document listed above and any of its revisions only valid after being approved by CAAC with
Stamp and signature on its front cover as well as its List of Effective Pages.
c. The specific procedure referred within the document listed above will be automatically granted
acceptance by CAAC, and the certificate holder may revise it in accordance to the procedures
specified. These procedures should also be carried out by the certificate holder in practical.
d. CAAC keep the right of continue to assess and evaluate the document listed above according to
the regulations, as well as to the procedures referred within the document, and require correcting any
deficiencies. The certificate holder shall take proper corrective action for the deficiencies in timely
manner; otherwise, the above approval or acceptance will result to terminate automatically.
e. The termination of approval or acceptance to the document listed in above table or any of its
referred procedures will result to terminate the validation of certificate holder’s operation specifications
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
CCAR121_135 Operations Specifications(76)
