EN EN
POWERED-LIFT AIRCRAFT CATEGORY PRACTICAL TRAINING SKILL TEST OR PROFICIENCY CHECK
Manoeuvres/Procedures Instructor’s initials when training completed Chkd in Examiner’s initials when test completed
OTD FTD FFS PL FFS PL
6.4 Landing(s) with visual reference established at DH following an instrument approach. Depending on the specific flight guidance system, an automatic landing shall be performed P ----. M*
Section 7 Optional equipment
7 Use of optional equipment P ----. ----.
E. Specific requirements for the airship category
1.
In the case of skill tests or proficiency checks for airship type ratings the applicant shall pass sections 1 to 5 and 6 (as applicable) of the skill test or proficiency check. Failure in more than 5 items will require the applicant to take the entire test/check again. An applicant failing not more than 5 items shall take the failed items again. Failure in any item of the re-test/re-check or failure in any other items already passed will require the applicant to take the entire test/check again. All sections of the skill test or proficiency check shall be completed within six months.
FLIGHT TEST TOLERANCE
2.
The applicant shall demonstrate the ability to: a) operate the airship within its limitations; b) complete all manoeuvres with smoothness and accuracy; c) exercise good judgement and airmanship; d) apply aeronautical knowledge; e) maintain control of the airship at all times in such a manner that the successful
outcome of a procedure or manoeuvre is never in doubt;
EN EN
f) understand and apply crew coordination and incapacitation procedures; and
g) communicate effectively with the other crew members.
3. The following limits shall apply, corrected to make allowance for turbulent conditions
and the handling qualities and performance of the airship used.
(a)
IFR flight limits:
Height:
Generally ±100 feet
Starting a go-around at decision height/altitude +50 feet/-0 feet
Minimum descent height/altitude +50 feet/-0 feet
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:欧洲委员会规章 EUROPEAN COMMISSION Regulations(140)