(b)
Install the body
-
Insert the tool OUT75 in the body with the slots in line with the locking cam screws.
-
Insert the screwdriver (no specific) in the slots and turn the screws conter-clockwise approximately half a turn to retract the locking cams.
-Remove the screwdriver (no specific) and leave the tool OUT75 in position.
-Slide the mounting sleeve back and remove it. Remove the spacer (if no used).
-If necessary, install the guard or the applicable spacer on the body.
-Insert the body in the panel cutout. Make sure that the guard or spacer (if installed) is correctly positioned under the flange on the body.
-Slide the mounting sleeve on the body in the correct direction for the thickness of the panel as shown on the view J or K (mounting sleeve end A or B) (Ref. Fig. 011)
-Insert the tool OUT87-1 in the slots of the tool OUT75. TORQUE the locking cam screws to between 0.12 m.daN (10.6194 lbf.in) and 0.14 m.daN (12.3893 lbf.in) to extend the cams.
-Remove the tool OUT87-1 and the tool OUT75.
(c) Install the head (Ref. para. 3.E.(1)(c)).
20-45-11 Page 22
Sealed Illuminated Pushbutton Switch - Installation
NSA933687 and NSA933688
Figure 011
20-45-11 Page 23
____________________________________________________________________
4. ABS0951 and E0415 with Mounting Sleeve (E0416) and Connector (E0417) R (Ref. Fig. 012, 013)
A. P/N identification
(1) Body and Head (ABS0951 and E0415)
ABS0951 C 3 L M 001
------------
| | | | | | | | | | | ------ Head code | | | | | | | | | ---------- Front face code | | | ------------- Leds voltage code (L=5V) | | ----------------- Quality code of the switches | -------------------- Function code |A:indicator | |B:momentary action switch | |C:doudle-throw switch -------------------------- Standard P/N
E0415* C* 3* L M 001 M*
------------ -| | | | | | | | | | | | | --- Manufacturer code |M: EATON manufacturer | | | | | | |E: ECE manufacturer | | | | | | |without code: ECE or
R | | | | | | | EATON manufacturer | | | | | ------ Legend display code | | | | | | | | | ---------- Front face code | | | ------------- Lamp voltage code |L:5V (E0530-01) | | | | | ----------------- Quality code of the switches | -------------------- Function code |A:indicator
R | |B:momentary action switch R | |C:doudle-throw switch -------------------------- Standard P/N
____
NOTE : Information for E0415 body P/N is identified with an asterisk(*). Example : E0415 C 3 M.
20-45-11 Page 24
R Illuminated Pushbutton Switch - Layout R ABS0951, E0416, E0417 and E0419 R Figure 012
20-45-11 Page 25
Illuminated Pushbutton Switch - Layout E0415 (ECE and EATON), E0416, E0417, E0418 and E0419 R Figure 013
20-45-11 Page 26
(2)
Mounting sleeve (E0416) E0416 - 02 -------| | | ------ Item number code | --------------- Standard P/N
(3)
Connector (E0417)
(a)
For the complete connector E0417 A* 01 S* ----- -- -- --| | | | | | | -------- Delivery code| S: supplied with locator | | | | and without contact | | | | Without: supplied with locator | | | | and contacts | | | | XA: supplied with locator | | | | and without contact (EATON) | | | | XB: supplied with locator | | | | and without contact (ECE) | | | | | ----------- Item number code | | | -------------- Function (foolproofing) code | -------------------- Standard P/N
____
NOTE : The information identified with an asterisk(*) is not marked on the connector.
(b) For the polarization key only R
E0417 P A
-------| | | | | -------- Manufacturer code | A=EATON | | | B=ECE | | | ----------- Type code | ---------------- Standard P/N
20-45-11 Page 27
B. P/N Characteristics
(1) Body and head (ABS0951 and E0415)
(a) Temperature - Minimum operating temperature is -55 deg.C (-67.00 deg.F). - Maximum operating temperature is 85 deg.C (185.00 deg.F).
(2) Mounting sleeve (E0416)
(a) Temperature - Minimum operating temperature is -55 deg.C (-67.00 deg.F). - Maximum operating temperature is 125 deg.C (257.00 deg.F).
R (3) Connector (E0417) (Ref. Fig. 014)
(a) Temperature - Minimum operating temperature is -55 deg.C (-67.00 deg.F). - Maximum operating temperature is 125 deg.C (257.00 deg.F).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 ESPM Electrical Standard Practices Manual 3(67)
